Fender USA Telecaster Neck with Maple Fingerboard, Left Hand

Full Description

Replacement Fender USA Telecaster Neck

This replacement Fender Telecaster guitar neck has been set up so that minimal effort is required to get it built on to your guitar. The maple neck includes a maple fingerboard, along with 22 medium jumbo frets which means that you don't have to spend lots of time marking out frets to get suitable intonation. In addition, its classic Fender headstock features six pre-drilled holes, along with two guide pin holes for each tuning machine. A synthetic bone nut is also included, and features pre-slotted string location grooves to help you fitting the strings. This replacement neck supplies you with everything, so all you need to do is add the body, components and strings.

Measurements:

• Peg Hole Diameter - .397” (10.08 mm)
• Headstock Thickness - .540” (13.71 mm)
• Thickness at the 1st Fret - .820” (20.82 mm)
• Thickness at the 12th Fret - .870” (22.09 mm)

Features

• Replacement neck for left handed Fender USA Telecaster
• Maple fingerboard with 22 medium jumbo frets
• Comfortable “modern C” profile
• Built-In Micro Tilt Neck Adjustment System
• 6 Pre-Drilled Tuning Machine Holes with 2-Guide Pin Holes for Each Tuning Machine
• Each neck is serialized and stamped during quality inspection
• Walnut "skunk" stripe on back of neck
• Fender Logo Decal includes "Made in USA"
• Synthetic bone nut is pre-slotted with grooves for easy string location

Specifications

• Configuration: Left-Hand
• Fingerboard: Maple
• Number of Frets: 22
• Fret Size: Medium Jumbo
• Neck Shape: Modern "C"
• Neck Material: Maple
• Neck Finish: Satin Urethane on Back of Neck, Gloss on Face of Headstock
• Fingerboard Radius: 9.5" (241 mm)
• Scale Length: 25.5" (648 mm)
• Nut Material: Synthetic Bone (Melamine)
• Nut Width: 1.685" (42.8 mm)
• Position Inlays: Black Dot
• Truss Rod: Bi-Flex Design with 1/8" Truss Rod Adjustment Nut