Mackie Thump 15A Active PA Speaker - Secondhand

Full Description

Built to perform

You don't just want to hear your music. You want to feel it. That's exactly what you get with the Mackie Thump 15A. Loaded with a high-performance amplifier capable of producing a massive 1300W (peak) of power, you can experience what Thump really means...

The 15A's ultra-efficient amp boasts Mackie's Dynamic Bass Response™ technology, as well as a higher voltage power supply. Combined with a high-output 15'' woofer, the Thump loudspeakers deliver a low-end response with phenomenal impact and an extremely rapid response to transients. No matter where you are or what style of music you're playing, you can rely on the Thump 15A to pump out powerful, dynamic sound every single night.

Versatile and adaptable

Hook up your sound sources in seconds. With its integrated 2-channel mixer, the Thump 15A makes signal management easy. The mixer boasts two Vita™ preamps with Wide-Z™ technology. These let you connect microphone, line, and instrument signals without any hassle, so you no longer need an external mixer when you only intend to use one or two inputs.

The Thump 15A also features a selection of four different modes to optimise your sound for a variety of situations. These modes provide quick and easy settings for full-range music, intimate live sound, stage monitoring, and for when you're using a subwoofer. No complicated layered menus and endless parameter adjustments. Simply choose the mode that best fits your needs, and you're all set.

Features

• 15'' high-output LF woofer and 1.4'' titanium dome compression tweeter
• Incredibly efficient class-D amplifier - 1000W LF and 300W HF
• All-new amplifier design with Dynamic Bass Response™ technology
• Incredibly fast transient response for phenomenal bass performance
• Next-generation system protection and thermal limiting
• Integrated 2-channel digital mixer with intuitive controls
• Two digitally controlled Vita™ preamps with Wide-Z™ technology
• XLR thru for wired connection to additional speakers
• Powerful DSP section with four application-specific modes
• Tailor your speaker's performance to suit your needs
• Precision digital crossover and transducer time alignment
• Dual symmetrical monitor angles for stages
• Four-handle design for convenient transport to and from the venue
• Flexible mounting options with the integrated pole receptacle
• Universal power supply with Power Factor Correction technology

Specifications

• Frequency Range:
  • -10dB: 32Hz - 23kHz
  • -3dB: 39Hz - 20kHz
• Coverage Angle: 90° x 60° (H x V)
• Maximum SPL: 127dB
• Monitor Angle: 45°
• LF Transducer: 15'' / 381mm (with ferrite)
• HF Transducer: 1.4'' / 36mm titanium dome compression driver
• Rated Power: 1300W peak
• LF Power Amplifier:
  • Rated Power: 1000W peak
  • Rated THD: Cooling: Convection
  • Design: Class-D
• HF Power Amplifier:
  • Rated Power: 300W peak
  • Rated THD: Cooling: Convection
  • Design: Class-AB
• Input Type:
  • 2 x Female XLR, balanced
  • 1 x 1/4'', unbalanced
• Mic-Line Impedance: 8 k Ohms, balanced
• 1/4'' TS, Wide-Z™ Impedance: 1 M Ohm, unbalanced
• Mix Output: Male XLR, balanced
• Mix Out Impedance: 600 Ohms, balanced
• Main Control: Rotating knob, 0dB at full clockwise
• Sensitivity:
  • Main Control at 12:00: +4dBu for full output (Channel at 12:00)
  • Main Control at Fully Clockwise: +18dBu (Channel at 9:00)
  • Main Control at Fully Clockwise: -35dBu (Channel at fully clockwise)
• Crossover: 2kHz, 24dB/Octave
• Input Protection:
  • Peak and RMS limiting
  • Power supply and amplifier thermal protection
• Display LEDs:
  • Defeatable front power
  • Input signal/OL
  • Speaker mode
  • System limiter
• Cabinet:
  • Design: Trapezoidal
  • Material: Polypropylene
  • Finish: Black, textured
  • Handles: 2 x sides, 1 x top, 1 x bottom (4 x total)
  • Grille: Perforated metal with weather-resistant coating
  • Pole Receptacle: Yes
• Dimensions: 686mm x 442mm x 356mm / 27'' x 17.4'' x 14'' (H x W x D)
• Weight: 15.8kg / 34.8lbs