DISC ENGL Rockmaster E307 Guitar Amplifier Head

Full Description

A Dedicated Amp for the Rock Guitarist

While most amps are designed to accommodate a wide range of playing styles and genres, the Rockmaster E307 is built solely for the rock ‘n’ roll guitarist. Its smooth tonal qualities are versatile enough to accommodate the different aspects of both soft and hard rock, delivering plenty of punch and dynamics for soaring riffs and singing leads to run through the air. ECC83 and EL84 tubes provide the amp with its incredible tonal range, while the 20 watts of power makes it perfect from small venues and practice rooms. Featuring 2 channels, independent gains, and a 3-band EQ for all your tone shaping needs, the ENGL amp is also equipped with a built-in reverb and mid scoop to offer further sonic enhancements. If that wasn’t enough, the Rockmaster is also equipped with a power soak control to offer the choice between full power, 5 watts, 1 watt, and no power, ensuring the amp’s tone remains pure at any volume.

Excellent Connectivity

The amp features a range of ins/outs for players to expand their performance, allowing the connection of footswitches to control the amp’s functions. Offering 2 inputs for connecting a range of footswitches, players can control the amp’s channel select and mid shape, as well as the FX on/off and reverb. The amp’s FX loop allows the connection of external stompboxes to expand its tonal possibilities, while its balanced line out allows direct connection to mixers and recording devices. A range of poweramp outputs provide players with the choice of connecting the amp to 8 ohm and 16 ohm speaker cabinets.

Features

• Built as a dedicated amp for rock players
• Clean and lead channels offer wide range of tonal possibilities
• Independent gain controls and a 3-band EQ provide excellent tone shaping
• Built-in spring reverb and mid scoop offers perfect tone enhancements
• 20 Watts of power suits a small and medium sized venues
• Power soak control offers selection between full power, 5 watts, 1 watt, and power off settings
• FX loop for connecting external effect devices to expand tonal possibilities
• Footswitch inputs for external control over amps functions
• Line output provide direct connection to mixers and recording devices
• Made in Germany

Specifications

General

• Channels: Clean, Lead
• Power: 20 Watts
• Impedance: 8, 16 Ohms

Tubes

• V1: ECC 83 (12AX7), FQ Selected
• V2: ECC 83 (12AX7), Selected
• V3, V4: EL 84 (6BQ5) Matched Set

Controls

• Knobs: Clean Gain, Lead Gain, Bass, Middle, Treble, Reverb, Lead Volume, Master
• Switches: Mid Shape, Channel Select (Clean/Lead)
• Power Soak: Power Range Selector
  • Full Power
  • 5 Watts
  • 1 Watt
  • Speaker Off

Connections

• Input: 1/4” Jack (Instrument)
• FX Loop: Send, Return (1/4’’ Jack)
• Input Sensitivity:
  • Level Input, Clean Channel: -20 dB Nominal
  • FX Return: -20 dB, Approx. 0 dB Max
• Output Level FX Send, Level Range: -20 dB to Approx. 0 dB Peak
• Footswitch: 2 x 1/4'’ Jack
  • FX Loop On/Off & Reverb
  • Mid Shape & Channel Select (Clean/Lead)
• Line Output: 1/4'’ Jack (Frequency Comp.)
• Balanced Line Output: 0 dB Peak
• Poweramp Output: 4 x 1/4'’ Jack
  • 8 Ohms Parallel (1 x 8 Ohms, 2 x 16 Ohms)
  • 16 Ohms Serial (1 x 16 Ohms, 2 x 8 Ohms)

Power Requirements

• Power Consumption: 80 Watts Max
• Fuses: 0.4 ATL (T: Slo-Blo)
• Power Tube Fuses: 2 x 0.08 AM (80 mA M: Medium Blow)

Dimensions

• Width: 16.5’’ (42 cm)
• Height: 7.9’’ (20 cm)
• Depth: 9’’ (23 cm)
• Weight: 8.9 kg (19.6 lbs)