Laney Ironheart IRT-STUDIO Studio Rack Tube Amp - Secondhand

Full Description

Powerhouse speaker

This model offers the same tones as the larger Ironheart amplifiers but in a low-power, compact, and lightweight design. Equipped are ECC83 preamp valves, alongside EL84 output valves. With these, you are provided with 15W of pure tonal power with the option to switch to less than 1W for when louder volumes aren’t permitted. Despite its compact size, it still offers all the features required to take your performance to the next level. Three channels, three band EQ, and extended frequency ranges all provide you with the dynamic, tone, and reverb that you need to give your sound a personal touch.

Excellent connectivity

Alongside its incredible tonal capabilities, the Ironheart studio offers a wide variety of inputs and outputs that can seamlessly integrate into existing rigs. The D.I output is perfect for directly connecting your amp to DAWs, PAs, and mixing consoles. It also features a high-quality speaker emulator that delivers all valve tones to your DAW, PA, or even at the same time. Equipped with an internal dummy load, there is no need to connect an external speaker. Deliver a truly silent recording. Want to play along to your favourite songs? Plug in your smart device and be a part of any band you truly desire.

Specifications

• Product Code: IRT-STUDIO

General

• Power: 15W
• Channel: Clean, Rhythm, Lead
• Preamp Valves: 3 x ECC83
• Output Valves: 2 x EL84

Controls

• Lead Channel: Lead Gain, 3-Band EQ (Pull Function), Lead Volume
• Clean/Rhythm Channel: Clean/Rhythm Switch, Clean Volume, Rhythm Gain, 3-Band EQ (Pull Function), Rhythm Volume
• Master: Pre-Boost Switch, Pre-Boost, Channel Select Switch, Dynamics, Tone, Reverb
• D.I: Emulation Switch, 2 x Dip Switch (Ground Lift)
• USB: Dry Record Gain
• Headphones: Source (USB/AMP), Level
• FX Loop: FX Loop Switch (-10dBu/0dBu/Bypass)
• Loudspeaker: Impedance (8Ohms/16Ohms)

Connectors

• Inputs: ¼” Jack
• Input Impedance: 1M Ohm/47pF
• D.I: XLR
• USB: 2.0, ¼” Jack (Re-Amp Send)
• Headphones: ¼” Jack
• Aux In: 3.5mm Stereo Jack
• FX Loop: 2 x ¼” Jack (Send/Return)
• Remote: 5-Pin MIDI
• Loudspeaker: ¼” Jack

Power Requirements

• Power Consumption: 60 W
• Supply Voltage: 220V / 230V
• Mains Fuse: T250mA L
• HT Fuse: T100mA L

Dimensions

• Height: 8.8cm
• Width: 42.8cm
• Depth: 28.5cm
• Weight: 5.5kg