Full Description
View Full Description
Unrivaled preamp quality
With high headroom mic preamps, all XENYX mixers provide a powerful performance likened to much more expensive stand-alone preamps. The XENYX preamp offers an incredible 130 dB of dynamic range and a bandwidth extended from below 10Hz to over 200kHz for a sound full of transparency.
Studio quality compressor
Deriving inspiration from the classic studio equipment of the 1970s, the XENYX mixer features a transparent and musical compressor design. The component allows the full dynamic range to shine through until the signal hits its limit, which is easily monitored via the LED status. The quality compressor adds sustain whilst smoothing out more abrupt signal peaks such as aggressive metal lines or funk riffs, allowing you to play impactful bass lines whilst remaining in the mix.
British inspiration
Much like the compressor, the XENYX X2222USB mixer features a channel EQ based on the legendary sound of the British consoles from the 1960s and '70s. The channel EQ takes inspiration from the classic circuitry for signals that allow incredibly warm and detailed musical character.
Integrated digital multi-FX processor
The X2222USB mixer features a 24-bit multi-FX processor with 16 incredible presets including delay, chorus and reverb. Sound engineers may manually enter time-based functions via the tap button in time with the music. The digital effect presets may be applied to any channel and to the monitors and main output.
USB interface
An integrated bi-directional stereo USB audio interface lets you connect the XENYX X2222USB mixer straight into a PC or Mac computer via a single USB cable. This feature lets you record directly to your hard drive and can be edited with the included editing software. The Tracktion DAW software lets you easily compose, record, edit and mix your music to turn your computer into a studio quality recording device.
Features
- Premium ultra-low noise, high headroom analog mixer
- 8 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps
- 8 studio-grade compressors with super-easy "one-knob" functionality & control LED
- Neo-classic "British" 3-band EQs with semi-parametric mid band
- New studio-grade FX processor with 16 editable presets including reverb, chorus, flanger, delay, pitch shifter, multi-effects, Tap function & storable user parameter settings
- Built-in stereo USB/Audio Interface to connect directly to your computer
- 3 aux sends per channel: 1 pre fader for monitoring, 1 pre/post fader switchable for monitoring/FX applications, 1 post fader (for internal FX or as external send)
- Clip LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all channels
- 2 subgroups with separate outputs for added routing flexibility; 3 multi-functional stereo aux returns with flexible routing
- Balanced main mix outputs with ¼" jack and gold-plated XLR connectors, separate control room, headphones and stereo rec outputs
- Control room/phones outputs with multi-input source matrix; rec inputs assignable to main mix or control room/phones outputs
- Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
''Planet Earth'' switching power supply for maximum flexibility (100 - 240 V ), noise-free audio, superior transient response plus low power consumption for energy saving
- Rack mount brackets included for ultimate flexibility
- High-quality components and exceptionally rugged construction ensure long life
Specifications
- Microphone Input Type: XLR, Electronically Balanced, Discrete Input Circuit
- Mic EIN
- @ 0Ω Source Resistance: -134 dB / 135.7 dB A-Weighted
- @50Ω Source Resistance: -131 dB / 133.3 dB A-Weighted
- @150Ω Source Resistance: -129 dB / 130.5 dB A-Weighted
- Frequency Response:
- Gain Range: +10 to +60 dB
- Max Input Level: +12 dBu @ +10 dB Gain
- Impedance: 2.6kΩ Balanced
- Signal-To-Noise-Ratio: 110 dB / 112 dB A-Weighted
- Distortion (THD + N): 0.005 Percent / 0.004 Percent A-Weighted
- Line Input
- Type: 1/4" TRS Connector, Electronically Balanced
- Impedance: 20kΩ Balanced, 10kΩ Unbalanced
- Gain Range: -10 to +40 dB
- Max Input Level: 30 dBu
- Fade-Out Attenuation
- Main Fader Closed: 90 dB
- Channel Muted: 89 dB
- Channel Fader Closed: 89 dB
- EQ Mono Channels
- Low: 80Hz / ±15 dB
- Mid: 100Hz - 8kHz / ±15 dB
- High: 12kHz / ±15 dB
- EQ Stereo Channels
- Low: 80Hz / ±15 dB
- Low Mid: 500Hz / ±15 dB
- High Mid: 3kHz / ±15 dB
- High: 12kHz / ±15 dB
- AUX Sends
- Type: 1/4'' TS Connector, Unbalanced
- Impedance: 120Ω
- Max Output Level: +22 dBu
- Stereo AUX Returns
- Type: 1/4'' TRS Connector, Electronically Balanced
- Impedance: 20kΩ Balanced / 10kΩ Unbalanced
- Max Input Level: +22 dBu
- Main Outputs
- Type: XLR, Electronically Balanced and 1/4'' TRS Balanced
- Impedance: 240Ω Symm / 120Ω Unbalanced
- Max Output Level: +28 dBu
- Control Room Outputs
- Type: 1/4'' TS Connector, Unbalanced
- Impedance: 120Ω
- Max Output Level: +22 dBu
- Headphone Outputs
- Type: 1/4'' TRS Connector, Unbalanced
- Max Output Level: +19 dBu / 150Ω (+25 dBm)
- DSP Converter: 24-Bit Sigma-Delta, 64/128-Times Oversampling
- DSP Sampling Rate: 40kHz
- USB
- Audio: Stereo In/Out
- Connector: Type B
- Converter: 16-Bit
- Sample Rate: 48kHz
- Noise
- Main Mix: -101 dB
- Main Mix @ 0 dB: -93 dB
- Power Supply
- Mains Voltage: 100 - 240V, 50/60Hz
- Power Consumption: 50W
- Fuse: 100 - 240V
- Mains Connection Standard IEC Receptacle
- Weight: 5.09 kg
- Dimensions
- Height: 90 mm
- Width: 355 mm
- Depth: 430 mm
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country.
Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.