DISC Alto TS115A 15" Active PA Speaker

Full Description

Versatile Cabinet Design

All TRUESONIC 2-way speaker cabinets have been designed with verstility and longevity in mind. They feature a durable, lightweight polypropylene enclosure that is stand mountable for weekend gigs and flyable for more permanant installations. What's more, the have a trapezoidal design which greatly decreases the resonance of the standing wave in the cabinet for a more true and exact sound reproduction. The TRUESONIC TS115A is the perfect solution for musicians and DJs on the move and halls, malls, and houses of worship alike.

Total Transparency

The TRUESONIC Series was designed from the ground up to be the most transparent loudspeaker money can buy. Rigorous testing and thousands of hours of listening have gone into making sure that what you pump into a TRUESONIC speaker is exactly what you get out. Everything you see (and some things you don't) - from internal signal path and components used to the sculpted cabinet and meticulously designed waveguide - was developed in service of the principle of accurate, transparent sound.

Super Efficient Drivers

The drivers in the TRUESONIC TS115A are designed to make sure that virtually no energy is wasted. That translates to more of the power from the amplifier actually working to generate sound rather than heat, giving the speaker better real world performance than other speakers with comparable published specifications. The TRUESONIC TS115A offers a 15" LF driver (2" voice coil) and a 1" HF driver (Neodyminum Driver).

Modern amplifier design

Every active TRUESONIC speaker benefits from the use of a Class D amplifier integrated into the cabinet. Class D amps are generally lighter than Class A and AB amplifier designs, and offer more than enough power to provide your performance with a plenty of punch. The TRUESONIC TS115 delivers with 400 watts of power (335W LF / 65W HF) and offers a balanced combo jack (XLR/TRS) input with volume control.

Features

• 800 Watts of Class D power
• 15" low-frequency transducer, 1" neodymium driver
• Two Mic/Line combo inputs with independent volume controls
• XLR output to link speakers
• Lightweight, trapezoidal cabinet with handles
• Use as a traditional upright loudspeaker or as floor wedge monitor
• Stand and pole-mountable or flyable
• Clip Limiter with red LED
• Ground Lift switch
• Contour switch for increased EQ control
• Accurate audience coverage, not just on-axis
• Designed and tuned in the USA

Applications

• Mid/large-sized PA systems
• Halls, auditoriums, amphitheaters
• Gymnasiums, fitness centers, and dance studios
• Houses of worship
• Bars, restaurants, clubs
• Mobile DJ systems
• Special events, presentations, and weddings

Specifications

• Transducer Low: 15" Woofer, with 2" voice coil
• Transducer High: Neodymium compression driver, 1" exit with 1" voice coil
• Power Amplification: 800 Watts peak (670 W LF + 130 W HF), 400 Watts continuous (335 W LF + 65 W HF)
• Frequency Range: (-10 dB): 42 Hz -20 kHz
• Frequency Response: (±3 dB): 53 Hz -19 kHz
• Maximum SPL @ 1m: 126 dB peak, 123 dB continuous
• -6 dB Nominal Coverage: (80° / 100° H x 60° V)
• Active Crossover: 2.5 kHz
• Connectors: 2 x Mic / Line Female XLR - 1/4" combo inputs, 1 x Loop - Out Male XLR
• Input Control: Line / Mic -∞ to +50 dB, Maximum input level +23 dBu , Input Impedance 15 kOhms
• External Controls: Volume, Power switch with LED indicator, Clip/Limit LED, Ground Lift switch
• Protection Features: Over-excursion, Thermal, Driver
• AC Power: 100 VAC, or 110 - 120 VAC, or 220 - 240 VAC (50 / 60 Hz)
• Enclosure: Trapezoidal, with floor monitor capability. Injection molded, polypropylene enclosure, with perforated steel grille
• Mounting: Integrated pole-socket (36 mm dia.) Two handles, 6 M10 threaded sockets: 2 top, 2 bottom, 2 pullback
• Dimensions (WxLxH): 16.9in x 14.3in x 26.75in
• Weight: 39 lb