DISC Turbosound Dublin TCX118B 18'' Band-Pass Subwoofer, Black

Full Description

Band Pass Subwoofer

The Turbosound Dublin TCX118B Passive Subwoofer features a 18-inch dual ported bandpass enclosure, tuned for the best possible bass response. The custom tuning is designed to work in conjunction with Turbosound loudspeaker management systems. The high output and immense sound pressure levels ensures optimal audio performance and room coverage. The TCX118B Passive Subwoofer includes an 18-inch double suspension low frequency driver featuring a unique inside/outside wound voice coil for increased magnetic density, increased heat dissipation and high power handling capacity for optimal efficiency. The bandpass enclosure is highly efficient, generating the maximum bass output possible by increasing the acoustic load presented to the driver. This extended low frequency response and high efficiency is ideal for both FOH and sound reinforcement applications.

Design & Connectivity

The robust yet sleek birch plywood enclosure includes hard wearing semi matte black paint on the outside for optimal durability and reliability. M10 threaded rigging points are also included for suspension in permanent installations. A pole mount sockets is included, allowing the two-way cabinet to be mounted at the correct high above the subwoofer for the best possible audio performance. The rear of the subwoofer features dual Neutrik SpeakON NL4 connectors as well as a wired-in parallel with a 4-way barrier strip connector for added versatility.

Features

• Band pass subwoofer for portable PA and installation applications
• 1,000 Watts continuous, 4,000 Watts peak power
• Double suspension 18'' low frequency driver with inside/outside wound coil
• Low distortion dual port design for maximum sound pressure level
• 15mm (5/8'') birch plywood enclosure with hard wearing semi matte black paint finish
• Integral M10 rigging points for ease of installation
• 35mm pole mount to support satellite speaker
• Neutrik SpeakON NL4 and barrier strip connectors

Specifications

System

• Frequency Response:
  • +/-3dB: 35Hz - 125Hz
  • -10dB: 25Hz - 170Hz
• Nominal Dispersion: Half Space
• Power Handling (IEC):
  • Continuous: 1000W
  • Peak: 4000W
• Sensitivity: 97dB (1W at 1m)
• Maximum SPL:
  • Continuous: 127dB
  • Peak: 133dB
• Impedance: 8Ω
• Low-Frequency Driver: 1 x 18'' (457mm)

Enclosure

• Connectors:
  • 2 x Neutrik SpeakON NL4
  • 1 x Barrier Strip Terminals
• Wiring: Pins 1+ / 1- Input, Pins 2+ / 2- Link
• Dimensions (H x W x D): 660mm x 560mm x 660mm / 26'' x 22'' x 26''
• Net Weight: 38.6kg / 85lbs
• Construction: 15mm Birch Plywood
• Finish: Semi-Matte Black Paint
• Grille: Powder-Coated Perforated Steel
• Flying Hardware: M10 x 8 Points