DPA d:vote 4099V Clip Microphone for Violin

Full Description

Clean & Transparent Sound Quality

The DPA Microphones d:vote 4099 instrument microphones ensure superior isolation when used on stage or in the studio. The VO4099V microphone system is designed for use with violins, violas, mandolins, and even banjos, and comes complete with a single 4099HI instrument microphone, mounting clip for your instrument, a MicroDot extension cable, and a DAD4099-BC XLR adapter with low-cut. DPA's d:vote 4099 instrument microphones deliver exceptional stereo sound quality with realistic dynamics, allowing you to achieve the ultimate reproduction of your instrument. Equipped with a supercardioid polar pattern, the d:vote 4099 microphone provides you with superior gain-before-feedback, whilst a versatile gooseneck extension ensures the perfect recording position with exceptional stability. The discreet, lightweight, and rugged microphones of DPA's d:vote series offer incredibly natural, organic sound, and are perfectly suited to the dynamic range of a multitude of instruments.

Versatile Adapter System

DPA's d:vote series of miniature microphones are designed with versatility in mind. The d:vote 4099 instrument microphones work with all leading wireless microphone solutions from a huge range of manufacturers, meaning you're no longer tied down to a single wireless system. Instead of having to purchase a selection of brand new microphones when you change your wireless system, you can simply switch out your adapter with no loss or change in sound quality. This innovative adapter system is the only one of its kind available, and makes DPA's professional microphone systems one of the most versatile in the industry.

Convenient Instrument Mounting

The d:vote 4099 instrument microphones come complete with a handy clip designed to mount the microphone to your instrument. The VO4099V system includes a clip that can be easily attached to your instrument. The clip allows you to easily un-clip the microphone, re-position it, or move it to another instrument entirely whilst retaining the perfect recording position when you come back to that particular instrument. The flexible design of DPA's mounting clips ensures an exceptional variety of mounting and positioning possibilities and choices.

In The Box

• 1 x 4099HI Instrument Microphone In Pouch, Hi-Sens
• 1 x VC4099 Clip For Violin & Mandolin
• 1 x CM1618B00 MicroDot Extension Cable, 1.6mm, 1.8m/5.9ft
• 1 x DAD4099 MicroDot to 3-Pin XLR Adapter with Belt Clip and Low Cut

Features

• Superior gain before feedback
• Natural sound that is easy to blend with pickup
• Flexible and easy mounting
• Mount has no impact on the acoustic sound
• Detachable cable and a versatile gooseneck extender
• Flexible adapter system fits most professional wireless systems

Specifications

• Directional Pattern: Supercardioid
• Principle of Operation: Pressure Gradient
• Cartridge Type: Pre-Polarized Condenser
• Frequency Range: 20Hz to 20kHz
• Frequency Range (+/-2dB at 20cm): 80Hz to 15kHz with 2dB soft boost at 10 to 12kHz
• Sensitivity (Nominal, +/-3dB at 1kHz): 6mV/pA; -44dB re. I V/Pa
• Equivalent Noise Level (A-Weighted): Typ. 23dB(A) re. 20 uPa (Max. 26dB(A))
• S/N Ratio (A-Weighted) (re. I kHz at I Pa (94dB SPL)): Typ. 71dB(A)
• Total Harmonic Distortion (THD): Less than 1 percent up to 123dB SPL peak
• Dynamic Range: Typ. 100dB
• Max. SPL (Peak Before Clipping): 142dB
• Output Impedance:
  • From MicroDot: 30 to 40 Ohms
  • From DAD4099/DAD6001-BC: 100 Ohms
• Cable Drive Capability: Up to 300m (984ft) with DAD4099 or DAD6001-BC XLR adapter
• Output Balance Principle: Signal Balanced with DAD4099 or DAD6001-BC XLR adapter
• Common Mode Rejection Ratio (CMRR): Greater than 60dB from 50Hz to 15kHz with DAD4099 or DAD6001-BC XLR adapter
• Power Supply (For Full Performance): Min. 5V to max. 50V through DPA adapter for wireless systems
• Current Consumption: Typ. 1.5mA (microphone). 3.5mA with DAD4099 or DAD6001-BC XLR adapter
• Connector: MicroDot
• Colour: Black
• Weight: 33g
• Microphone Diameter: 5.4mm / 0.21''
• Microphone Length: 45mm / 1.8''
• Cable Length: 1.8m / 5.9ft
• Cable Diameter: 1.6mm (0.06'') / 2.2mm (0.09'')
• Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099 or DAD6001-BC XLR adapter)
• Temperature Range: -40 Degrees C to 45 Degrees C (-40 Degrees F to 113 Degrees F)
• Gooseneck Length: 140mm / 5.5''