OFFLINE Sennheiser EW-DX EM 2 Wireless Receiver, S1-10 Band

Full Description

Simplify your wireless workflow

The EW-DX EM 2 makes it easy to receive audio signals from Evolution Wireless transmitters. The Sennheiser Performance Audio Codec ensures a low latency of 1.9 ms, while the wide dynamic range means you don't have to set gain on wireless transmitters. Plus the on board controls makes it super easy to change settings with ease.

Thanks to Autoscan you can set up your wireless system too. At the push of you can get multiple transmitters set up at equidistant frequency intervals; great if you want a super-scalable system to work with. And as well as this there are a wide range of Sennheiser apps you can use to manage and control your wireless setup - great if you are looking to configure a large system.

Features

• Digital half rack unit with two-channel’s in rugged metal housing
• Switching bandwidth up to 88 MHz
• Proprietary Sennheiser Performance Audio Codec (SePAC) allows for low latency of 1.9 ms
• The dynamic range is 134 dB so you don’t need to set gain on any wireless transmitters (this is thanks to SePAC)
• Easily allocate intermodulation-free channels with equidistant channel spacing – 600Hz spacing for up to 146 channels, link density (LD) mode has 300 kHz spacing for up to 293 channels
• Network enabled so you can use Sennheiser Control Cockpit, Wireless System Manager and 3rd party systems – all enabling expanded remote control
• Power over Ethernet and Ethernet connectivity
• Securely transmit confidential content using AES 256 encryption
• AutoScan allows for quick setup with equidistant channel spacing for frequencies – and you don’t even need RF knowledge
• Shows the quality of the links separate to RF leves with the Link Quality Indicator
• Use the Smart Assist App over BLE for remote control up to 25 meters
• Easy-to-use interface with an OLED display, jog wheel navigation and control buttons
• Volume controllable headphone output on front panel
• More menu settings include custom frequency list, selectable sync parameter and walk test

Specifications

System

• Bluetooth® Low Energy (BLE) frequency range: 2402 – 2480 MHz
• Audio frequency response: 20 Hz – 20 kHz (-3 dB) @ 3 dBfs
• Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level
• Dynamic range: 134 dB
• System latency: 1.9 ms
• Operating temperature range: -10 °C – +50 °C
• Relative humidity: 5 – 95% (non-condensing)

EW-DX EM 2 Wireless Receiver

• Input voltage range: 11 - 13 V or PoE IEEE 802.3af Class 0
• Input Current: ≤ 1A
• Transmit power (radiated): BLE: max. 10 mW EIRP
• Audio output power: 18 dBu max.
• Ethernet: RJ-45 socket, IEEE802.3, 100Base-TX (half+full duplex), 10Base-T (half+full duplex), (CAT5e or higher)
• Dimensions: 212 x 44 x 189 mm
• Weight: approx. 1000 g (without antennas and power supply)