DISC Alto AMX-100FX Mixer with DSP Effects

Full Description

Despite their dimensions the AMX mixers include some features that are not always available on products of this class such as an extra MIC channel with one of the stereo input (on selected models), a volume control for the Tape input, a gain control for the stereo return (so that it can be sed as additional input channel) and full EQ on MIC and stereo channels.

Features/Specifications:

• 2 MIC input channels with gold plated XLRs and balanced Line input.
• 4 stereo input channels with balanced TRS jacks.
• Ultra-low noise discrete MIC pre-amps with +48V Phantom power.
• Extremely high headroom offering extra dynamic range.
• Balanced inputs for highest signal integrity and low-noise operation.
• Warm, natural 3-band EQ on each channel.
• AUX send switch-able to PRE/POST fader.
• 2 AUX returns for additional functionality.
• Peak LED on each channel.
• 2-Track inputs with level control assignable to main mix, control room / headphone outputs.
• Highly accurate 4-segment bar graph meters.
• 24 bit digital effects processor with 256 effects (16 presets 16 variations).
• Effect on/off with MUTE switch or an optional footswitch

Further Specs:

• Peak LED on each channel.
• 2-Track inputs with level control assignable to main mix, control room / headphone outputs.
• Highly accurate 4-segment bar graph meters.
• 24 bit digital effects processor with 256 effects (16 presets 16 variations).
• Effect on/off with MUTE switch or an optional footswitch

• Microphone Input: Electronically balanced, discrete input configuration
• Frequency Response: 10 Hz to 55 kHz, +/ 3 dB
• Distortion (THD & N): 0.005% at 4 dBu, 1kHz
• Gain Range: 0 dB to 44 dB (MIC)
• SNR (Signal to Noise Ratio): 115 dB
• Line Input: Electronically balanced
• Frequency Response: 10 Hz to 55 kHz, +/ 3 dB
• Distortion (THD & N): 0.005% at +4 dBu, 1kHz
• Sensitivity Range: +15 dBu to 30 dBu

• Line Input: Balanced
• Frequency Response: 10 Hz to 55 kHz, +/ 3 dB
• Distortion (THD & N): 0.005% at +4 dBu, 1 kHz

• Microphone Input: 1.4k Ohm
• All Other Inputs: 10k Ohm or greater
• Tape Out: 1k Ohm
• All Other Output: 120 Ohm

• Hi Shelving: +/ 15 dB @12 kHz
• Mid Bell: +/ 12 dB @2.5 kHz
• Low Shelving: +/ 15 dB @80 Hz
• Low Cut Filter: 75 Hz, 18 dB/oct

• A/D and D/A Converters: 24 bit
• DSP Resolution: 24 bit.
• Type of effects:
            - Hall, Room, Vocal & Plate REVERBS
            - Mono & Stereo DELAY (max DELAY TIME 650ms)
            - Chorus, Flanger & Reverb MODULATIONS
            - REVERB+DELAY, REVERB+CHORUS
            - REVERB+FLANGER combinations

• Presets: 256
• Controls:
            - 16-position PRESET Selector
            - 16-position VARIATION selector
            - PEAK LED
            - MUTE SWITCH with LED indicator

• Noise (Bus noise): Fader 0 dB, channels muted - 100 dBr (ref.:+4 dBu)
            - Fader 0 dB, all input channels assigned and set to
            - UNITY gain: 90 dBr (ref.:+4 dBu)

• Max Output: +22 dBu unbalanced, 1/4" jacks
• AUX Returns gain range: ∞ to +15 dB
• AUX Sends Max Out: +22 dBu