DISC Bricasti System 1, M7M and M10 with Serial Cable

Full Description

The Bricasti M10 Reverb Remote Console has been designed specifically for the M7M Stereo Reverb Processor. The M10 is made from solid, anodised aluminium which makes it very strong, durable and the same sort of style as the M7M to keep everything looking professional.

The Bricasti M7M Stereo Reverb Signal Processor brings together ease of use and high quality musicality into a reverb dedicated processor. The M7M is identical to the M7 with reduced front panel controls, as it is intended to be used with the M10 Remote Console.

Features & Specifications for M10 Remote:

• Custom milled solid aluminum casing and buttons, fine finished and anodized for an enduring design and classic look.
• Controls from 1-8 x M7s.
• Connects to the first M7 via R5422 9-pin serial cable, 10 meter cable provided, up to 30 meters that is 480L compatible, simple to install with no practical distance limits, or IP addresses to configure. Longer distances may require an additional power source for the M10.
• Simple serial "loop thru" for connecting more M7's. connect to the first and loop to the second, and third etc.
• DC Power is supplied from the M7 through the cable, no wall warts, or external supplies.
• 8 meters, for 4 stereo pairs, metering 4 machines at a time.
• Machine selection is a dedicated Machine key in the M10:
• Press the machine key to "toggle or step through" for 2 x M7 operation.
• Press the machine key and use the log wheel to step through the machines for control of more than than 2 x M7s.
• Press the machine key and use the 1-4 keys to directly access any machine, for control of more than 2 x M7s.
• Use the "up down keys" to change banks and for metering for control of more than 4 x M7s.
• Same clear easy to read display as used in the M7
• Same user interface as the M7, with the addition of Machine and Setup keys, so no need to learn something new.
• Simultaneous control of the M7 from both the M7s front panel and or the M10 with a lock out.
• Setup key for M10's local memory, configuration, and settings.
• Maximum Output Level: +24 dBu

Features & Specifications for M7M Stereo Studio Reverb:

• More than 200 Unique reverb presets
• Revolutionary new reverb algorithm True Stereo Reverb Process
• Classic and new Presents; Halls, Plates, Chambers, Ambient Spaces
• 12 Parametric Program Parameters
• 100 User Registers
• 4 Front panel "Favourites" for quick saves and compares
• Dual Dedicated Power Supplies
• Custom design toroidal transformer linear supply for analog
• High performance switching supply for digital
• Separate Digital and Analog modules
• non corrosive Stainless Steel chassis and top cover
• Milled anodized aluminium front panel, knobs and button caps
• Positive feel 2 db stepped analog input level control
• MIDI I/O
• Hand Crafted in the USA

• AES 24 Bit Digital I/O
• AES single wire 192k supported
• Self-clocking to incoming sample rates 44.1k to 192k
• 6 State of the art dual core Analog Devices DSPs

• < 20 Picoseconds Jitter
• Input level adjustable in 2 dB steps
• Balanced XLR analog I/O
• 24-bit conversion
• Dual D/A
• Fully-balanced, DC-coupled analog input and output circuits Analog Input A/D
• Analog Input A/D
• Dynamic Range >116 db, A-Weighted
• THD+N <.001
• Frequency Response: 10 Hz - 20 kHz ± < 0.05 dB
• CMRR: > 60 dB @ <= 1 kHz
• Maximum Input Level: +24 dBu
• Minimum Input Level for 0 dBFS: +4 dBu Analog Output D/A
• Analog Output D/A
• Dynamic Range: > 116 dB, A-Weighted
• THD+N: < 0.001
• Frequency Response: 10 Hz - 20 kHz ± < 0.05 dB
• Maximum Output Level: +24 dBu