Unsupported Browser
The web browser that you are currently using is no longer supported, and as such features of this website may not work as expected. We advise you to update to a currently supported browser (such as Chrome, Edge, or Firefox) to improve your security, speed, and overall experience.
6.5" High Resolution Nearfield Studio Monitor
Dedicated 60W (LF) + 40W (HF) bi-amplifier
Extended 55Hz - 38kHz frequency response
Magnetically shielded drivers
Time-aligned front baffle design and internal HP Sound reflectors
Main Features
Low Frequency Unit
6.5" (160mm) with HR (Hyper Radial) diaphragm which utilises the latest diaphragm �Radial Papermaking Technology` for natural and smooth sound reproduction
UDR (Up/Down Roll) Tangential driver edge eliminates the unwanted resonance
Wide-range 20mm hard dome tweeter
Employs magnesium diaphragm which eliminates metallic characteristics and features ultra-fast high frequency response
LF and HF units feature highly rigid cast aluminum frames minimizing unnecessary vibrations and resonances
Magnetically shielded drivers allow for safe placement close to a video monitor
Time-aligned front baffle enclosure design with the recessed HF driver for a sharply focused sound image
Unique HP sound reflectors prevents the generation of standing waves in the enclosure
Bi-amplifier
Dedicated 60W (LF) + 40W (HF) bi-amplifier eliminates electric interference between the drivers
Overall output level control
Dedicated tweeter level control (±3dB) cut/boost
LO EQ control : ±3d cut/boost around 55Hz for optimum performance in varying environments
SPEAKER SECTION
Impedance 6 ohm (LF) / 8 ohm (HF)
Speaker Units
LF unit 160mm HR diaphragm woofer
HF unit 20mm Magnesium Dome tweeter
Frequency response 55Hz - 38kHz
Maximum Sound Pressure Level 104dB/W (Max/rated input)
Enclosure Type Bass reflex type with HP sound reflectors
AMPLIFIER SECTION
Output
LF 60W (typical)
HF 60W (typical)
Input - Balanced
Connector XLR-3-31 type (Pin 2:HOT) x 1
Impedance > 10k ohm
Level +4dBu
Input - Unbalanced
Connector ?m phone jack x 1
Impedance > 10k ohm
Level -10dBV
Crossover Frequencies 6kHz / -18dB / Oct (LF) & 8kHz / -18dB / Oct(HF)
Tweeter Level Control ±3dB variable
Lo EQ control 55Hz, ±3dB variable
PHYSICAL
Dimensions 230(W) x 350(H) x 334(D)mm
Weight Approx. 13kg
Power Requirements 120V, 60Hz. 230V, 50/60Hz. 230V, 50Hz
Power Consumption 70W