DISC Omnirax Commander keyboard workstation

Full Description

The Commander is the ultimate composing / mixing / editing workstation! The desk is wide enough for an 88-note controller keyboard with an astounding 44 rack spaces of gear and a sliding computer keyboard shelf all within easy reach.

12 rack spaces on each cabinet's sloping top front, perfect for rack mount mixers and modules. In fact, if using 2 Mackie 1604's with their input/output pods rotated to jacks-to-back position, you can have the mixer and 5 rack spaces of gear in each cabinet's top front, putting a lot of gear within easy reach

4-space module right in the center just behind the controller within easy reach

10 rack spaces in the left cabinet's lower front (the first 4 are vertical, the next 6 are sloping), 6 sloping spaces and a sliding computer shelf in the lower right. 7"H x 19.125" clearance for a computer

10 rack spaces in lower rear of left cabinet, and 6 in lower rear of right: for a total of 60 rack spaces

Monitor bridge is 33.75" wide in front, with sliding computer keyboard shelf 27" W x 15" D underneath. The shelf slides out a full 18", enabling the keyboard to be positioned directly over the controller slightly behind the piano keys. Optional Omnirax PLEXMS music stand (not pictured) can be clipped to this shelf to hold sheet music, etc.

Can accept Omnirax KMSC computer sliding shelf for additional computer keyboard under desktop if desired

On heavy-duty casters for mobility and easy cabling.

Note that pictured equipment is not included.