Shure BLX14/SM31-K3E Wireless Headset System with SM31FH

Video 1
Video 2
Video 3
Video 4
Video 5

prev next

View PDF

This product is currently unavailable for delivery to your country

Buy this Nearly New for $369.00 >

Key Features

606 MHz - 630 MHz wireless operating frequency range
User friendly wireless system for fitness instructors
Lightweight, moisture resistant headset microphone
Uninterrupted signal thanks to Quickscan technology
14-hour battery run time and 100 meter range

Shure BLX14/SM31-K3E Wireless Headset System with SM31FH Overview

The BLX14/SM31 Wireless System can handle your most intense workouts. The SM31 Fitness Headset is made from corrosion proof materials. You can sweat on it. Shout into it. And it will perform just as you need it.

Built to ensure rock solid signal from transmitter to receiver. Shure BLX Wireless Systems eliminate interference and drop-outs. You'll sound completely clear. And thanks to one-touch Quickscan technology, all the hard work is done for you. Locating the best frequency for your performance is as easy as pushing a button. No trial and error. No complicated set up. Just one press.

Product Ref: 64798

Full Description

View Full Description

So how do I get set up?

It's simple. Plug the mic output (found on the back of the receiver) into a channel on your mixing desk. Just like a normal wired mic.

Press the group button on the receiver to perform a Quickscan. This searches your environment to locate the clearest frequency for your performance.

Plug your SM31 headset into the TGQ connection on the transmitter. Use the group and channel buttons to ‘pair’ the transmitter to the receiver. The 'ready' LED on the receiver will light up. Finally, turn up the transmitter gain dial to suit your voice. And it's as easy as that! You can now perform with wireless freedom.

SM31FH Headset Microphone

The SM31 Fitness Headset has been specially made for aerobics and fitness instructors. Its rugged, wire-form design is built to last, and will stay in place even during high energy workouts. And because it's been assembled with lightweight components, you can comfortably wear it for hours.

It sounds exceptionally clear too, offering the same quality as Shure’s famous handheld mics. And thanks to moisture resistant fabrics, the mic capsule is completely safe from sweat.

Comprehensive monitoring

With a Shure BLX System, you get wireless freedom with total peace of mind. The receiver’s ‘ready’ LED, telling you when your system is set up and secure. You don’t need to worry about signal dropouts.

If the channel starts clipping, an LED switches from green to red, letting you know when to adjust the transmitter's gain. There is even an LED monitor to tell you when the batteries are running low on the transmitter. Everything about the BLX Wireless System is clear and simple, for effortless setup straight out the box.

Legendary Shure durability

Boasting the tour-tough construction Shure are revered for.

The BLX14UK/SM31-K3E has been rigorously tested to make sure it can handle any environment. All Shure wireless systems are subject to heat, cold, humidity and the ‘Shure drop test’. They are built to survive the demands of life on the road. They’re ready for every performance.

Included in the Box

1 x SM31FH-TQG Headset Microphone
1 x BLX1 Body Pack Transmitter
1 x Shure BLX4 Analogue Single Channel Receiver
1 x Clothing Clip
2 x Windshields
1 x Power Supply
2 x AA battery

Features

Shure SM31FH-TQG Headset Mic

Comfortable and lightweight wire frame design
Moisture resistant fabrics protect mic from sweat
Super secure fit even during high energy workouts
Clear, detailed sound similar to quality handheld mics
Cardioid polar pattern focuses only on your voice
Flexible gooseneck for quick, easy adjustments
Windscreen tames wind and breath noise
Clothing clip keeps cable tucked away
Permanently-charged condenser capsule (phantom power not required)
TA4F (TQG) connector compatible with any Shure bodypack

BLX1 Body Pack Transmitter

14-hour run time and a 100 meter range from one pair of AA batteries
Quick and easy frequency matching
Continuously adjustable gain dial
Easily accessible on/off switch
Power & battery status LED
Clip-on design easily attaches to performer
Lightweight, comfortable and discrete build
Rugged and robust - built for rigorous live performances
TA4F (TQG) connection for use with Shure headset, lavalier, instrument mics and guitar cables

BLX4 Single Channel Receiver

User friendly and intuitive design – no complicated setup options
One touch QuickScan finds the best open frequency for uninterrupted signal
Internal microprocessor-controlled antenna keeps the unit discrete and compact
Two colour LED for monitoring signal level
Compatible with up to 12 other systems
XLR & 1/4" audio outputs

Specifications

SM31FH Headset Microphone

Connector: TA4F (TGQ)
Type: Condenser
Frequency Response: 45Hz - 20kHz
Polar Pattern: Cardioid
Output Impedance: 600Ω
Audio Output Level: -50 dBV/Pa
Signal-To-Noise Ratio: 66dB
Maximum SPL: 145.0 dB
Dynamic Range: 117 dB
Equivalent Output Noise: 28 dB
Power Requirements: +5 V DC, 10 V Maximum
Cable Length: 1.1m
Net Weight: 60 g

BLX1 Body Pack Transmitter

Connector Type: TA4F (TGQ)
Operating Range (Up To): 100 m
Batteries: AA (included)
Battery Life: 14 hour
Battery Status: Multi-Colour LED
Transmitter Housings: Molded ABS
Gain Adjustment Range: 26 dB
Included Antenna: 1/4 Wave
Input Impedance: 1 MΩ
Weight: 75 g
Dimensions (H x W x D): 110 mm x 64 mm x 21 mm

Your order may contain items that use a 240V UK plug or a 220V EU plug

Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.