Behringer VT100FX Virtube 100W 2-Channel Guitar Amp + FX - Nearly New

Full Description

With amazing Virtual Tube Circuitry or VTC, you'll have that incredible tone mistaken for an actual tube amplifier. The Behringer VT100FX's authentic modelling provides the rich harmonic content of a tube, without the tube!

The VT100FX contains a handmade heavy-duty 12" BUGERA vintage guitar speaker for classic sound reproduction.

Virtual Tube Circuitry (VTC)

Virtual Tube Circuitry is designed to accurately replicate the tube sound, right down to details of its interaction between classic tube stages and its responses to subtle tonal changes as one stage hands off to another. All this gives an amazingly natural sounding tube sound.

Customisable Clean and Overdrive Channels

The Clean channel is pure and simple, with a volume control and analogue passive equaliser. You can switch between Clean and Crunch. The Overdrive channel features gain, bass, treble, volume and proprietary contour controls. Here you can switch between OD1 and OD2 for two unique Overdrive sounds. All these controls allow you to pinpoint the tone you're looking for.

A Range of Digital FX

The VT100FX boasts a range of quality effects through a 24-bit digital effects processor. There are 16 great-sounding effects including delays, flangers, choruses and reverbs. The delays and reverbs provide different options and environments, i.e. cathedral reverb and stage reverb. The VT100FX also has a dedicated FX loop for external effects devices, like wah-wah pedals and rack effects, to add along with the ones on this amp.

Play Through Headphones and Along to Music

The Phones/Line Out B Jack not only lets you play your guitar silently through headphones or out through another audio source, but it does this with the use of speaker simulation to provide tube tone. You can also use also plug in Cd/Tape/Mp3 decks into the CD-IN/ LINE OUT A jack (without speaker simulation) so you can play along to your favourite music.

The VT100FX comes with a dual footswitch FS112VT for channel selection and FX bypass. This amp is built with high-quality components and with a long-lasting rugged design for a consistent amplifier.

For more information, you can look at the web brochure, manual and quick start guide below:

Web Brochure:

Manual:

Quick Start Guide:

Features/Specifications

• Powerful 100-Watt, 2-channel guitar amp with authentic tube modeling, thanks to Virtual Tube Circuitry.
• Quality duel Digital FX processors; includes chorus/delay, delay plus separate reverb, chorus, flanger.
• Heavy-duty 12" BUGERA vintage guitar speaker.
• Full-featured Clean and Overdrive channels for a range of tonal possibilities.
• 2 Switchable modes on each channel, Clean/Crunch (Clean) and OD1/OD2 (Overdrive).
• Each channel has independent bass, mid and treble tone controls.
• Sweep through the midrange with Contour control.
• Headphone and Line output with speaker simulation.
• Dedicated CD input with playback of line-level signals (e.g. music players, drum machines).
• Dedicated FX loop for other external effects devices like wah-wah pedals and rack effects.
• Includes dual footswitch FS112VT for channel selection and FX bypass.
• Built with high-quality components and a long-lasting, rugged design.

Physical Specs

• Dimensions:
  • Height: 21.6" (550mm)
  • Width: 22.8" (580mm)
  • Depth: 10.9" (275mm)
• Weight: 44.9 lbs / 20.4 kg

Audio Inputs:

• Input: 1/4" TS, RF Filtered
• Input Impedance Approx. 1 MΩ, unbalanced
• FX Return: 1/4" TS
• Input Impedance: Approx. 33kΩ, unbalanced
• CD In: 1/4" TRS
• Input Impedance: Approx. 5.6kΩ, unbalanced

Audio Outputs

• FX Send: 1/4" TS
• Output Impedance: Approx. 8.2, kΩ, unbalanced
• Line Out/Phones 1/4" TRS, unbalanced
• Output Level: max. +16 dBV / 100Ω

Amplifier

• Peak Power: 100 Watts/ 4 Ω

Digital Signal Processing

• Converter: 24-bit sigma-delta
• Sample Rate: 40 kHz

Loudspeaker

• Size: 12"
• Model: BUGERA Vintage Guitar Series 12G70J4
• Impedance: 4 Ω
• Continuous Power (IEC268-5): 70 Watts
• Peak Power: 280 Watts
• Output Type: 1/4"
• Output Min. Load Impedance: 4 Ω

Power Supply

• Power Consumption: max. 180 Watts
• Fuse 100V , 50/60 Hz: T 2.5 A H 250 V
• Fuse 120V , 50/60 Hz: T 2.5 A H 250 V
• Fuse 220-230 V , 50/60 Hz: T 1.0 A H 250 V

Please note, the original boxing is scuffed and the seals are broken, the manual is also missing, otherwise the unit itself looks and operates as new. It was returned unwanted by a customer under our 14 day money back guarantee.

This is a great opportunity to buy a fully functioning, nearly new product at a discounted price, supplied with a two year warranty.