DISC Behringer VT30FX Virtube 30W 2-Channel Guitar Amplifier with FX

Full Description

With amazing Virtual Tube Circuitry or VTC, you'll have that incredible tone mistaken for an actual tube amplifier. The Behringer VT30FX's authentic modelling provides the rich harmonic content of a tube, without the tube!

The VT30FX boasts a handmade heavy-duty 10" BUGERA vintage guitar speaker for amazing classic sound reproduction.

Virtual Tube Circuitry (VTC)

Virtual Tube Circuitry is designed to accurately replicate the tube sound, right down to details of its interaction between classic tube stages and its responses to subtle tonal changes as one stage hands off to another. All this gives an amazingly natural sounding tube sound.

Customisable Clean and Overdrive Channels

The Clean channel is pure and simple, with a volume control and analogue passive equaliser. The Overdrive channel features gain, bass, treble, volume and proprietary contour controls. All these controls allow you to pinpoint the tone you're looking for.

A Range of Digital FX

The VT30FX boasts a range of quality effects through a 24-bit digital effects processor. There are 16 great-sounding effects including delays, flangers, choruses and reverbs. The delays and reverbs provide different options and environments, i.e. cathedral reverb and stage reverb.

Play Through Headphones and Along to Music

The Phones/Line Out B Jack not only lets you play your guitar silently through headphones or out through another audio source, but it does this with the use of speaker simulation to provide tube tone. You can also use also plug in Cd/Tape/Mp3 decks into the CD-IN/ LINE OUT A jack (without speaker simulation) so you can play along to your favourite music.

The VT30FX comes with a dual footswitch FS112VT for channel selection and FX bypass. This amp is built with high-quality components and with a long-lasting rugged design for a consistent amplifier.

For more information, you can look at the web brochure, manual and quick start guide below:

Web Brochure:

Manual:

Quick Start Guide:

Features/Specifications

• Powerful 30-Watt, 2-channel guitar amp with authentic tube modelling, thanks to Virtual Tube Circuitry.
• Quality Digital FX processor; includes chorus/delay, delay plus separate reverb, chorus, flanger.
• Heavy-duty 10" BUGERA vintage guitar speaker.
• Full-featured Clean and Overdrive channels for a range of tonal possibilities.
• Each channel has independent bass, mid and treble tone controls.
• Sweep through the midrange with Contour control.
• Headphone and Line output with speaker simulation.
• Dedicated CD input with playback of line-level signals (e.g. music players, drum machines).
• Includes dual footswitch FS112VT for channel selection and FX bypass.
• Built with high-quality components and a long-lasting, rugged design.

Physical Specs

• Dimensions:
  • Height: 16.9" (430mm)
  • Width: 18.7" (475mm)
  • Depth: 9.4" (240mm)
• Weight: 24.2 lbs / 11 kg

Audio Inputs:

• Input: 1/4" TS, RF Filtered
• Input Impedance Approx. 1 MΩ, unbalanced
• CD In: 1/4" TRS
• Input Impedance: Approx. 4 kΩ, unbalanced

Audio Outputs

• Line Out/Phones 1/4" TRS, unbalanced
• Output Level: max. +10 dBV
• Output Impedance: 100Ω

Amplifier

• Peak Power: 30 Watts/ 4 Ω

Digital Signal Processing

• Converter: 24-bit sigma-delta
• Sample Rate: 40 kHz

Loudspeaker

• Type: 10"
• Model: BUGERA Vintage Guitar Series 10G50J4
• Impedance: 4 Ω
• Continuous Power (IEC268-5): 50 Watts
• Peak Power: 200 Watts

Power Supply

• Power Consumption: 45 Watts
• Fuse 100-120V~, 50/60 Hz: T 1.25 A H 250 V
• Fuse 220-230V~, 50/60 Hz: T 630mA H 250 V
• Mains Connection: Standard IEC Receptacle