TC Helicon Duplicator Vocal Processor - Secondhand

Full Description

Double Tracking

Double tracking has been used in studio recording for many years, adding punch and texture when needed. The Duplicator brings that iconic studio sound to your live performances, delivering tight, loose and octave options that sit well in any mix.

Correction When Needed

For that added reassurance when needed, the Duplicator is equipped with transparent auto-chromatic pitch correction, which will nudge your pitch to the nearest semitone if any mistakes are made. This is the perfect tool for live performances, giving you added support when you need it most.

Optimum Performance

The Duplicator is ideal for both live and studio sessions, and is equipped with Adaptive EQ (equalization), compression, de-ess and gate which automatically shapes your vocals, ensuring that every note is clear. The Duplicator automatically sets your mic gain, eliminating the stress of having to find the optimum gain level. Finally, the Duplicator can be powered by four AA batteries (not included), or an optional 9V adapter.

Features

• Choice of 3 Doubling styles, including Tight, Loose and Octaves
• Room, Club and Hall reverb choices
• Transparent auto-chromatic pitch correction helps you sing at your best
• Battery operation (batteries optional)
• Clean, clear, low noise mic preamp with phantom power
• Reverb and Tone can remain on whether Doubling is on or off so you always sound great
• Mic Control allows remote Harmony on/off using the switch on the Sennheiser e 835 FX or TC-Helicon MP-75 mic
• Rugged all-metal construction
• USB connection to free VoiceSupport application for easy firmware updates
• 9V operation (vs 12V) to accommodate common pedalboard power supplies
• Automatic input gain – no more setting and adjusting input gain

Specifications

Connections

• Input Connector: XLR female, balanced
• Input Impedance: 3k4/1k7 Ohm
• Input Clip Sensitivity: -1 dBu
• SNR A-Weighted: >114 dB
• Phantom Power: 24V (always on)
• Output Connector: XLR male, impedance balanced, pin 2 hot
• Output impedance: 200/100 Ohm
• Output Full Scale Level: +7.5 dBu
• Input to Output Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz

Controls

• 3 high quality doubling presets
• Correction amount
• Adaptive Tone on/off
• Mic Control on/off
• Footswitch on/off
• Power on/off

Included Effects

• Doubling
• Reverb
• Tone
• Correction

Design

• Height: 5.4 inches (140 mm)
• Width: 3.5 inches (90 mm)
• Depth: 2.3 inches (60 mm)
• Weight: 0.92 lb. (0.42 kg)