Key Features
- Accurate 45mm Faders
- LED for Peak Clip Warning
- Balanced Inputs & Outputs
- 30 Adjustable Frequency Bands
- Dual Channel Outboard Equalizer
BSS FCS-960 Dual Mode 30 Band Graphic Equalizer - Nearly New Overview
Nearly New: This product may have been opened for quality control purposes, returned by a customer, refurbished, or may have non-essential parts or software missing. Otherwise, the product operates as new. This is a great opportunity to buy a fully functioning product at a discounted price.
Product Ref: 65524
Full Description
View Full DescriptionThe BSS FCS-960 Graphic Equalizer features two channels both with thirty 45mm faders to control equalization filters at third octave isocentre frequency intervals from 25Hz to 20kHz. Also incorporating a mechanical centre point detent and electrical centre tap the FCS-960 Equalizer allows the selected frequency filter to be removed from the signal path stopping any signal saturation making it an excellent choice for minor altercations on select frequencies or across the board adjustments.
Each channel also incorporates a hi-pass filter with independent bypass switch whilst the inclusion of an LED clipping indicator, EQ in/out switch, electronically balanced inputs and floating balanced outputs provides even greater control over audio and compatibility with mixing desks and other outboard equipment.
Features
- Dual 30 Band Graphic Equalizer
- 30 Adjustable Frequency Bands
- 45mm Faders for Maximum Control and Precise Adjustments
- Centre Dented Fader with Electrical Centre Tap for True 0dB Mode
- Variable High Pass Filter with Bypass Switch
- Gain Control for System Loudness Normalization
- Peak Clip LED for Signal Overload Warning
- Channel Bypass Selection
- Balanced Inputs and Outputs
Specifications
Input
- Impedance: 10k Ohm (Electronically Balanced)
- Input Level (Max): +20dBu
- Connector: XLR
Output
- Output: Electronically Balanced, Floating
- Output Level (Max): +20dBu (600 Ohms)
- Connector: XLR
System Performance
- Frequency Response: 20Hz - 20kHz
- THD (+4dBu): <0.005%, 20Hz - 20kHz
- Output Noise (Flat): <90dBu, 22Hz - 22kHz, Unweighted
- Channel Separation: >80dB from 20Hz - 20kHz
- Gain Control Range: +/ 10dB
- Peak Indicator: +18dBu
- Bypass: Passive Failsafe Bypass Relay
Filters:
- Type: MFB Constant Q
- Frequencies Per Channel: 30 Off, On 1/3 Octave ISO Centres
- Boost/Cut Range: Nominal +/- 10dB
- Mode: Selectable Normal or Fine Response
- HPF (20Hz - 20kHz): 18dB / Octave Butterworth
General
- Input Connections: 2 x XLR
- Output Connections: 2 x XLR
- EQ Bands: 30 Per Channel (60 Total)
- Housing: 3U Rack Spaces
- Power Requirements: AC 30VA 50/60 Hz, Selectable 90/120V or 190/250V, IEC AC Power Cord
- Width: 19" / 482mm
- Height: 5.25" / 132mm
- Depth: 8.9" / 227mm
- Weight: 6Kg
| Reviews of our service
View all
