JBL JRX215 15'' Passive PA Speaker - Secondhand

Full Description

Robust enclosure for sound you can trust

Constructed from 19'' MDF, using state of the art adhesives and assembly techniques, the enclosure is reliable and acoustically superior to many others. A dual angle pole mount lets you mount the speaker straight or to tilt it by 10°. The carry handles are completely non-resonant, so you can carry the speaker easily without it affecting your sound.

Advanced speaker constructions

A JBL 15" woofer with edge wound ribbon voice coil delivers a punchy and defined low/mid frequency response, whilst a JBL 1" exit compression driver horn reproduces high frequencies with absolute clarity. The JRX215 incorporates an advanced cross-over design to ensure maximum dynamic headroom, tailoring the frequency response for optimum audio coherence.

A Progressive Transition wave guide provides superior high frequency coverage control with reduced distortion and a smoother response. Sonic Guard technology helps to protect the HF driver from any signal spikes or overloading.

The JBL JRX215 is the perfect choice when looking for a passive speaker that offers clear audio reproduction alongside JBL reliability.

Features

• BL 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil
• JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver
• Advanced network topology crossover design shapes frequency response and delivers "coherent summation"
• High power rated crossover circuit
• Progressive Transition high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
• The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard)
• SonicGuard protects the high frequency driver from excess power without interrupting the performance.
• Non-resonant, all-steel handles are used
• Attractive 18-gauge hexagon perforated, steel grille protects components from damage
• Dual-angle pole-mount socket allows the speaker to tilt 10 degrees for more uniform audience coverage

Specifications

• Power Rating: 250 W / 1000 W
• Frequency Range (-10 dB): 41 Hz - 18 kHz
• Frequency Response (±3 dB): 59 Hz - 13 kHz
• Sensitivity (@1m): 99 dB SPL (1w/1m)
• Nominal Impedance: 8 ohms
• Recommended Amplifier Power: 250 W to 500 W into 8 ohms
• Maximum SPL: 129 dB
• Nominal Dispersion: 90 x 50
• Crossover Frequency: 2.2 kHz
• Dimensions (H x W x D): 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in)
• Weight: 27.4 kg (60.5 lb)
• High Frequency Driver: JBL 2414H-C 1" exit
• Low Frequency Driver: JBL M112-8
• Input Connectors: Neutrik Speakon NL-4 (x1); .25 in TS phone jack (x1); parallel
• Grille: 18-gauge, powder-coated steel
• Mounting & Suspension: 36 mm, dual-angle pole-mount socket