dbx DriveRack PA 2 Loud Speaker Management System - Secondhand

Full Description

Tame your sound

The dbx DriveRack PA 2 Loud Speaker Management System is a clever bit of kit. Everything you need to keep your live sound in check. From intelligent equalization, to feedback suppression and limiting to keep your speakers protected. Installation is easy. With dbx's setup Wizard you'll be up and running in no time.

Complete control from the palm of your hand. The DriveRack PA 2 features built-in mobile connectivity. Use the DriveRack PA 2 app to adjust and manage your speakers on the fly. Freeing you up to direct your audio from any location.

AutoEQ

Take the pressure off. With dbx's AutoEQ you can get the best sound possible. Without bending over backwards. Fast, accurate, and effective. AutoEQ's algorithm sets speaker levels and room EQ automatically. Meaning you won't have to bore your audience with sound tests.

Show feedback the door

Get rid of feedback. Without affecting your tone. dbx's AFS feedback elimination system is fast and precise. Anticipating feedback before it even has a chance to strike. And adjusting speaker levels automatically. Ensuring your sound is clear and feedback-free.

Features

• All New Setup Wizard
• Streamlined AutoEQ
• All New AFS (Advanced Feedback Suppression)
• Mobile Control (Android, iOS, Mac, Windows)
• dbx Compression
• Graphic EQ
• 8-Band Parametric EQ (adjusted when using the AutoEQ) Input
• Subharmonic Synthesis
• Crossover (supports full range, 2-way, and 3-way systems)
• 8-Band Parametric EQs (used for speaker tunings) Output
• dbx Limiting
• Driver Alignment Delays

Specifications

• Input: (2) line inputs. (1) RTA Mic input
• Input Connectors: (2) Female XLR line inputs. (1) Female XLR RTA Mic input
• Input Type: Electronically balanced/RF filtered
• Input Impedance: >50 kohm
• A/D Converter: dbx Type IV Conversion System
• CMRR: > 45dB
• Mic Preamp Phantom Power: +15VDC (RTA)
• Mic Preamp Equivalent Input Noise (EIN):
• Output: (6) Line Outputs
• Output Connectors: Male XLR
• Output Type: Electronically balanced, RF filtered
• Output Impedance: 120
• Max Output: +20dBu
• A/D Dynamic Range: 112 dB A-weighted, 110 dB unweighted
• Type IV Dynamic Range: 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW
• Alignment Delay: 10ms per channel (60ms total)
• Sample Rate: 48kHz
• Dynamic Range: >110 dB A-weighted, >107dB unweighted
• THD+Noise: 0.003 typical at +4dBu, 1kHz, 0dB input gain
• Frequency Response: 20Hz - 20kHz, +/- 0.5dB
• Interchannel Crosstalk:
• Operating Voltage: 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
• Power Consumption: 22 W
• Unit Weight: 5.25 lbs. (2.4 kg)
• Shipping Weight: 6.75 lbs. (3.1 kg)
• Dimensions: 1.75" (H) x 5.75" (D) x 19" (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
• D/A Dynamic Range: 112 dB A-weighted, 110dB unweighted