Key Features
- Make live performances easier than ever before
- Allows you to switch seamlessly between four instruments
- Class A buffer provides a natural tone at all times
- Compact size ensures it easily integrates into your pedal board
DISC Radial Tonebone Bumper Instrument Selector Overview
Sleek, compact, versatile. The Radial Tonebone Bumper Instrument Selector is a tool unlike no other. This handy little device can effortlessly integrate into your pedalboard. It allows you to connect up to four instruments to a single guitar amp. Toggling between them is as easy as hitting the footswitch. The Tonebone bumper is ideal for multi-instrumentalists who need to juggle instruments (sometimes during the same song!) The inclusion of a Class-A buffer ensures your tone remains natural at all times. Take your performances to the next level with the Radial Tonebone Bumper Instrument Selector.
Product Ref: 71941
Full Description
View Full DescriptionClass-A buffer circuit
One of the most unique features of the Bumper Instrument Selector is Radial's own Class-A buffer circuit that produces the optimal natural tone. With each instrument connected to the Selector, the tone can be crafted further with Drag™ control load correction. This compensates the buffer time and replicates the tone to feel as if the instrument was connected directly to an amplifier.
Features
- Radial's renowned Class-A buffer circuit
- Connect up to four instruments simultenously
- Built-in separately buffered tuner
- High output active instruments tailored using the trim control
- Drag™control load correction
Specifications
- Audio circuit type: Discrete class-A, except tuner output
- Frequency response: 20Hz-20kHz
- Gain: -0.22dB
- Dynamic range: 109dB
- Maximum input: +7dBu with trim fully clockwise (no level reduction)
- Input impedance
- trim mode: 220kohms
- drag mode: 20kohms to 1Mohms
- Output impedance: 120ohms
- Equivalent input noise: -109dBu, A-weighted
- Noise floor: -109dBu, A-weighted
- Intermodulation distortion: 0.015 percent @ -20dBu
- Total harmonic distortion (THD): Less than 0.007% @ -20dBu
- Phase deviation: -15° @ 20Hz, +5° @ 20kHz
- Crosstalk: -94dB
- Tuner output: Always-on buffered output
- LED indicators: Large 3mm OD ultra-bright LED’s
- Construction: 14 gauge steel
- Power: 9V / 40mA (center pin negative)
- Construction: Steel enclosure
- Weight: 1.4lb (0.63kg)
- Warranty: Radial 3-year, transferable
- Product Code: R800-7094-00
| Reviews of our service
View all