This product is currently unavailable for delivery to your country
Key Features
- Powerful tones with maximum headroom
- Plenty of power for any stage or studio application with a thunderous 800-Watt rating
- Enjoy a booming, punchy tone from dual 10" Eminence Neodynium speakers
- Sonically versatile thanks to its 3-button voicings, effects loop, and overdrive circuit
Fender Rumble 800 Combo, 230V EU Overview
The Fender Rumble 800 Combo is an enormously versatile bass amplifier. Offering a thunderous, punchy tone and plenty of ways to personalise your sound, it's the ultimate companion for a gigging musician. Its dual Eminence neodymium speakers voice a booming low end that will fill out any mix. Complete with a switchable on/off compression horn, you can also imbue your sound with higher frequencies when needed.
Additionally, inbuilt voicing options let you change up the output to your taste. Combine that with a gain circuit to introduce a gravelly distortion, and you can slot into just about any musical genre of your choosing! Topped off with a inbuilt effects loop for endless sonic customisation and an XLR output for easy recording and gigging, the Rumble 800 is an amplifier that will excel in any situation, from the rehearsal room to the big stage...
Product Ref: 238967
Full Description
View Full DescriptionGigging convenience
Combo amps just make your lift that little bit easier. All your sound in one portable box! And it's a box that's not lacking for power, because with 800 Watts RMS at your disposal, you've got enough sonic force to be heard at the noisiest venues. And if you really need an extra dose of power, then the line out to an external speaker lets you build your sound to an even greater level!
Three distinct voicings
Find your tone. Switchable between "Bright", "Contour" and "Vintage" modes, the Rumble 800 has plenty of dynamics to choose between.
Bright offers a punchy and crisp cadence, with a leaning towards top-end frequencies for a deeply melodic sound. Contour servers up a scooped mids sound, resulting in an impactful tone that can make your bass stand out in solo sections. Finally, the "Vintage" setting voices a warm and chunky fat sound, reminiscent of older tube amps.
EQ, gain and drive controls
Complete with these three voice settings is a wide array of EQ options. In particular, Gain, Drive and Level let you inject some ferocity and punch into the tone. Roll them back for cleaner and crisper sounds or crank them to reveal a dirty and rumbling bass roar. Additional Bass, Low and High Mid, Treble and Master settings enable you to sculpt the sound to suit any situation or song style.
Inbuilt effects loop
Build your sound. An inbuilt effects loop lets you route your stompboxes through the amplifier for a consistent signal after the preamp stage, so you can get the most out of each effect.
Easy recording with an XLR output
It's got the sonic power for the stage and the finesse for studio recording. Equipped with an XLR output, the Rumble 800 series is easy to connect to your audio interface. It allows you to get maximum tone when recording, and cuts out the hassle of setting up a microphone.
Specifications
- Product Name: Fender Rumble 800 Combo, 230V EU
- Product Code: 2372106000
- Series: Rumble
- Amplifier Type: Class-D
- Colour: Black
- Country of Origin: ID
Electronics
- Controls: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume, Full/Low Power Switch
- Inputs: One 1/4"
- Line Out: One - (Xlr With Ground Lift)
- Channels: One - (With Selectable Bright Switch, Contour, Vintage Switch And Overdrive)
- Voltage: 230v Eur
- Wattage: 800 Watts
Hardware
- Control Knobs: Vintage-Style Radio
- Amplifier Covering: Black Textured Vinyl
- Grille Cloth: Silver
- Handle: Molded Plastic Strap With Nickel-Plated Caps
- Accessories: Footswitch
Speakers
- Speakers: Two - 10" Custom-Designed Eminence® Neodymium
- Total Impedance: 8 Ohms
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.
| Reviews of our service
View all