LD Systems FX 300 Vocal Effects Pedal

Full Description

FX that go further

The LD Systems FX 300 Vocal Effects is a Pedal allows you to express yourself with clarity. Loaded with 16 powerful presets, the FX 300's high-quality digital effects are the perfect way to take your sound to the next level. These potent possibilities are in 16-bit quality, and give you everything from reverbs and delays, to hypnotic chorus and unique combinations. And no matter which preset you're using, the handy FX Mute pedal gives you instant hands-free control over switching your effects on and off.

Mix it up

The LD Systems FX 300 Vocal Effects Pedal is more than an effects processor. This powerful device also functions as a powerful and intuitive 2-channel mixer. Boasting dedicated channels for microphones and instruments, you can optimise your sound with ease.

The microphone channel features an input that's capable of accommodating both dynamic and condenser microphones thanks to switchable +48V phantom power. You can plug in via XLR or 1/4'' connectors thanks to the XLR-1/4'' combo connector. There's also a handy high-pass filter available, so you can remove any unwanted low-frequency content from your microphone signal. Perfect for preventing that detrimental 'mud' from having too many bass and low-mid sounds in your overall mix.

Then there's your instrument channel. With a low-noise instrument input with a high-impedance design, it's ideal for acoustic guitars, bass guitars, and other instruments too. You can enjoy plenty of headroom, so you don't have to worry about your signals becoming distorted. This channel also features an additional FX loop so you can implement your own effects with ease.

Each channel features dedicated controls for FX Send, Gain, and Tone, so you can fine-tune your sound with ease directly from the front panel. Your effect preset can be selected by the 16-section rotary control on the right, whilst the overall output can be set with the Mix Out control below it. And if you want to completely mute your signal, simply hit the second pedal labelled Mute All. It's as easy as that. Complete with convenient signal indicators and the potential to provide up to 5 hours of operation when using a 9V battery (can also be powered by an external 9V PSU, batteries and PSU not included), you can perform with confidence night after night.

Specifications

System

• Channels: 2
• Operating Voltage: External mains adapter 9VDC, 250mA (not included)
• Dimensions: 160mm x 55mm x 163mm (W x H x L)
• Weight: 0.65kg
• Product Code: LDFX300

Microphone Channel

• Inputs: 1 x XLR/6.3mm jack
• Frequency Response: 50Hz - 20kHz
• XLR Input Amplification Range: 42dB
• Mono Mic Input THD-N: Less than 0.03-percent
• XLR Impedance: 6000 Ohms
• Phantom Power: +48VDC to XLR input
• Input Type: Electronically-balanced
• Jack Input Amplification Range: 20dB
• Jack Input THD: Less than 0.045-percent
• Microphone EQ: +5/-8dB at 8kHz
• Channel Controls: FX Send, Gain, Tone
• Channel Display Elements: Channel Signal

Instrument Channel

• Inputs: 1
• Gain Range: 23dB
• THD: 0.03-percent
• EQ: +7/-8dB at 10kHz
• Channel Inserts: 1
• Channel Controls: Artist Pedal, FX Send, Gain, Tone
• Indicators: 3-Colour LED (SIG), Channel Signal

Main Section

• Line Outputs: 2 x 6.3mm TRS, XLR
• XLR Output: +17dBu max. output level (balanced), 150 Ohm impedance
• Jack Output: +5dBV max. output level (unbalanced), 40 Ohm impedance
• Digital Effects Processor: Yes
• Number of Presets: 16
• Main Section Controls: DFX Presets, FX Mute, Mix Out, Mute All, Power
• Display Elements: Effect-Clip, FX Mute, Mute All, Red LED (FX CLIP)