Full Description
View Full Description
Unlimited tone
Blow the room away. With 300W of power at 4 ohms and 150W at 8, this amp will blast your basslines out at incredible force, offering more volume than you would ever need. What makes it even better is this earthquake of sound doesn’t come at the detriment of the amp’s tone. The Little Mark IV still holds its iconic natural warmth and provides multiple ways to refine every little detail.
A four band EQ is a perfect place to start, giving you plenty of room to adjust with the ability to either increase or decrease each band up to 16dB, making the head easily customisable to suit any genre. For quicker access to the EQ, Markbass have included a three-way switch, letting you quickly change between a super-balanced flat tone, a scooped pre-set that boosts highs and lows while dropping the mids, or finally a footswitch option to control the mute and scooped EQ simultaneously.
No connectivity difficulty
Optimised so you can efficiently connect your devices, the Little Mark IV 300 U offers up a wide selection of connectivity options. An effects loop is situated on the back of the amp head, meaning that you can send the tonal influence of the amp to your effects, as opposed to just the raw signal of your bass, giving you more tonal variation. As you would expect, a standard unbalanced 1/4 “ jack input is featured on the front alongside a combo speaker output, which is featured on the back, alongside a standard DI line out. A tuner out connection also allows you to add a tuner into your setup, to ensure total tonal accuracy during every moment of the performance. It’s safe to say these features make this bass head extremely user friendly.
Gig ready
The Markbass Little Mark IV 300 U is the perfect companion for the gigging bassist. Designed to be portable, this bass head weighs in at just 2.8kg, making it extremely lightweight, especially when considering the power it possesses. Built in house from the ground up, the bass head comes packed with a power amp crafted to elevate the inherent tone of your instrument, ensuring an exceptional live tone, so you can perform without limitations.
Specifications
- Input Impedance: 1 Mohm, Max. Voltage: 9 Vpp
- Return Impedance: 22 Kohm, Max. Voltage: 10 Vpp
- Gain: –46 Db To +23 Db Range
- Line Out Level Control: On Front Panel
- Pre/Post Eq (For Line Out) Switch: On Rear Panel
- Ground Lift Switch: On Rear Panel
- Volume Controls: Mute Switch, Master Volume
- Low: Center Frequency 68 Hz; Level: ±16 Db
- Mid Low: Center Frequency 360 Hz; Level: ±16 Db
- Mid High: Center Frequency 800 Hz; Level: ±16 Db
- High: Center Frequency 10 Khz; Level: ±16 Db
- Old School: Max Cut Range: 250 Hz – 20 Khz
- 3 Way Switch: Flat/Scooped-Mid/Fsw
- Send Effects: Unbalanced, Max. Voltage 20 Vpp
- Tuner Out: Unbalanced, Max. Voltage 2 Vpp
- Line Out: Balanced Xlr, Max. Voltage 20 Vpp
- Speaker Out: Speakon/1/4” Combo, 1/4”*
- Height: 2 Rack Units (3.27 In. / 83 Mm)
- Width: 10.87 In. / 27.6 Cm (19 In. / 48.3 Cm With Optional Rack Ears)
- Depth: 10.04 In. / 25.5 Cm
- Weight: 6.17 Lbs / 2.8 Kg
- Limiter: Bi-Band Limiter
- Footswitch (Optional): Flat/Scooped-Mid
- Output Power: 300w Rms @ 4 Ohm, 150w Rms @ 8 Ohm
- Power Requirement: MULTIVOLTAGE* power supply 120V÷240V
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country.
Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.