Key Features
- Massive power with 3000W peak output across two channels
- Easy frequency management from a built-in crossover network
- Monitor clipping, signal, and more with an accurate 8-segment LEDs
- Fits seamlessly in any standard 19" equipment rack
Lab Gruppen PD3000 3000 Watt Two Channel Amplifier - Nearly New Overview
The Lab Gruppen PD3000 3000 Watt Two Channel Amplifier delivers precise power management to entry/mid level live sound applications. It's capable of reaching huge SPLs courtesy of 1500W per channel. All thanks to lightweight and efficient Class-D technology.
Your speakers are in safe hands. The integrated limiter, short circuit protection, and cooling fan stops any nasty surprises stopping the show. Frequencies are delivered precisely to the right drivers with the built-in crossover network, so you'll never have to worry about damages affecting your transducers.
Small and mighty. The PD3000 was built for mobile use. Its rugged yet lightweight chassis fits neatly in any standard 19" equipment rack, so you've got all of your equipment exactly where you need it.
Nearly New: This product may have been opened for quality control purposes, returned by a customer, refurbished, or may have non-essential parts or software missing. Otherwise, the product operates as new. This is a great opportunity to buy a fully functioning product at a discounted price.
Product Ref: 289067
Full Description
View Full DescriptionFeatures
- Huge power output from two channels with 1500W each
- Lightweight and powerful Class-D amplification technology
- Highly efficient with a Switch Mode Power Supply (SMPS)
- Protects your drivers from peaks and clipping with a Speaker Protect Limiter
- Monitor every aspect of your amps performance with accurate 8-segent Signal and Limiter LEDs
- Easy frequency management from an integrated crossover with low-cut, high-cut, and full range mode
- Fully protected against short circuits, DC, and thermal overload
- Pristine signal from balanced XLR and TRS input connectors
- Prevents overheating with a temperature-controlled fan
- Rugged chassis for maximum durability
- Can be installed in any standard 19” rack unit
Specifications
General
- Number of amplifier channels: 2
- Peak total output of all channels driven: 3000W
- Peak output voltage per channel: 115V
- Peak output current per channel: 32A
- Bridge mode: No
- Output circuit type: Class-D
Amplifier outputs
- Max output power (all channels driven)
- 2 ohms per channel, stereo: 1000W
- 4 ohms per channel, stereo: 1500W
- 8 ohms per channel, stereo: 800W
Audio performance
- THD+N 20 Hz - 20 kHz @ 1 W: (less than) 0.1
- THD+N @ 1kHz, 1 dB below clip: (less than) 0.1
- Signal-to-noise: (more than) 90 dB
- Channel separation (Crosstalk) @ 1 kHz: (more than) 75 dB
- Frequency response: 10 Hz to 20 kHz, +0.5/ -1 dB
- Input impedance: 10 kΩ unbalanced, 20 kΩ balanced
- Distortion,1/8 rated power: (less than) 0.1
System
- Control
- Front: Power switch, Gain controls (channels A and B)
- Rear: Stereo / mono, switchable Xover: LF / full range / HF, switchable
- Crossover frequency: 100Hz Indicators
- Power: RDY LEDs lit green
- Limit, per channel: LIM LEDs lit red
- Signal, per channel: -30 dB, -24 dB, -18 dB, -12 dB, -9 dB, -6 dB, -3 dB, LEDs lit green/orange
- Thermal Warning, per channel: RDY LED blink orange
- Thermal Warning 90 , PSU: Both RDY LEDs blink orange
- Thermal fault, per channel: RDY LED blink red
- Thermal fault 100 , PSU: Both RDY LEDs blink red
- Fault, channel: RDY LED lit constantly red
- Fault, device: Both RDY LEDs constantly lit red Connectors
- Inputs / link: 2 x XLR, 2 x 1/4" TRS
- Outputs: Neutrik speakON (2 x NLT4)
- Mains connector: Locking IEC appliance inlet, C14 Protection features
- Cooling: Two fans front-to-rear air flow, temperature controller speed
- Amplifier protection: Thermal and DC protection, Rail sensing and peak current limiting
- Load protection: Controlled start and shutdown, behavior, DC-fault protection, Short-circuit protection
Power supply
- Voltage: Separate 230 V and 115 V versions available. Not selectable on the product
- Power consumption @ 4 ohms: 1050 W
- UK / AUS / EU / Korea / China: 220-240 V, 50/60 Hz
Other
- Dimensions: 93 x 483 x 326mm (H x W x D)
- Weight: 6.5kg
- Product code: STA-125
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.
| Reviews of our service
View all