Full Description
View Full Description
High-impedance distribution - ideal for loudspeakers/speaker systems
The Tascam MA-BT240 240-Watt Mixing Amplifier is designed to cater to a variety of sound reinforcement systems. It has the capability to drive both standard low-impedance loudspeakers and high-impedance 70-volt / 100-volt distributed loudspeaker systems. This flexibility makes it an ideal choice for a wide range of small-format commercial spaces.
Powered by highly efficient Class-D amplification, the MA-BT240 delivers impressive output power for its compact size. With a total output power of 240 watts, it can produce 2 × 120 W at 4/8 ohms for low-impedance loudspeakers or 1 × 240 W at 100 V / 70 V for distributed loudspeaker systems. This ensures that the amplifier provides more than enough power for medium-sized commercial spaces, delivering clear and powerful sound.
Bluetooth receiver - wireless music streaming
With its built-in Bluetooth receiver, the MA-BT240 offers seamless wireless music streaming. The front-mounted Bluetooth antenna ensures stable reception, and if needed, you can extend the antenna using a compatible PR-SMA cable to position it optimally for your specific space. This feature allows you to easily connect your Bluetooth-enabled devices and enjoy the convenience of wireless audio playback.
Integration mixer with mic/line inputs
The MA-BT240 is equipped with a versatile built-in mixer. It features a switchable Mic/Line input with a ducking function, as well as two additional line inputs for external audio players. Each input can be mixed using the dedicated knobs on the front panel, allowing you to effortlessly balance audio sources. The Signal and Peak indicators provide visual feedback, enabling you to optimize signal levels at a glance.
Onboard EQ with HPF on output
To ensure optimal audio performance in any environment, the MA-BT240 comes equipped with EQ and high-pass filter controls. The high-pass filter prevents distortion in high-impedance systems, while the treble and bass controls allow you to fine-tune the sonic response of your setup.
Whether you need to enhance certain frequencies or create a more balanced sound, these controls give you the flexibility to tailor the audio output to your liking. Additionally, the amplifier's output can be switched between stereo and mono operation, allowing you to match the configuration of your loudspeaker system.
Rack-mountable design - compact 1U rack size
The MA-BT240 is designed with a compact 1U half-rack size, ensuring that it takes up minimal space in your setup. Whether you place it on a desktop or mount it in a standard equipment rack using the optional AK-RM05 rack kit (sold separately), the MA-BT240 fits seamlessly into any professional installation, making it a versatile and convenient audio solution.
Features
- Installation amplifier tailored for small to mid-sized facilities, equipped with comprehensive inputs and outputs
- Efficient Class-D amplifier suitable for standard stereo loudspeakers or high-impedance distributed speaker systems
- Incorporated Bluetooth receiver enables wireless music streaming from portable devices
- Equipped with two line inputs via RCA connectors
- Mic/Line input featuring a switchable Ducking/Paging function to automatically mute background music during announcements
- Built-in mixing facilitated by front-panel knobs for all inputs, excluding the Bluetooth stream
- Compact half-rack design allows convenient placement on desktop or shelf
- Bluetooth antenna extendibility, enabling optimal unit placement based on your environment
- Two-band EQ and high-pass filter on output, allowing system response fine-tuning
- Output adaptability to any speaker configuration through mono/stereo switching
- Master volume adjustment from an external controller, which is sold separately
- Line output suitable for monitoring, recording, or cascading to other power amplifiers
- Potential for rack-mounting with an optional kit, AK-RM05, which is sold separately
Specifications
Audio Inputs
- Mic/Line Inputs: Front: XLR/TRS combo jack (balanced), Rear: 4-pin Euroblock connector (balanced, 3.81 mm pitch)
- Maximum Input Level (MIC selected): –30 dBu
- Minimum Input Level: –65 dBu
- Input Impedance: ≥2 kΩ
- Maximum Input Level (LINE selected): +20 dBu
- Nominal Input Level: +4 dBu
- Input Impedance: ≥10 kΩ
- Line Inputs: RCA pin jacks (unbalanced)
- Maximum Input Level: +6 dBV
- Nominal Input Level: –10 dBV
- Input Impedance: ≥10 kΩ
Audio Outputs
- Line Outputs: RCA pin jacks (unbalanced)
- Maximum Output Level: +6 dBV
- Nominal Output Level: –10 dBV
- Output Impedance: 200 Ω
- Loudspeaker Outputs:
- High-impedance Output: 2-pin Euroblock connector (5.08 mm pitch)
- Rated Output: 1 × 240 W (70 V / 100 V)
- Composite Impedance: 100 V: ≥42 Ω, 70 V: ≥21 Ω
- Low-impedance Output: 4-pin Euroblock connector (5.08 mm pitch)
- Rated Output: 2 × 120 W (4 Ω or 8 Ω, 1 kHz, 1 THD)
- Load Impedance: 4 Ω / 8 Ω (selectable)
Other Inputs/Outputs
- Remote Output Volume Adjustment: 3-pin Euroblock connector (3.81 mm pitch) (1: Vcc 5 V, 2: Control, 3: GND)
- Bluetooth:
- Version: 5.1
- Output Class: Class 2 (approx. 10 m unobstructed transmission range)
- Supported Profiles: A2DP, AVRCP
- Codecs: SBC, AAC
Power Supply and Other
- Power Supply: Model for Europe: AC 220–240 V, 50/60 Hz
- Cooling Method: Natural air cooling
- Guaranteed Operating Temperature Range: 0–40 °C
- Guaranteed Operating Humidity Range: 5–85 (no condensation)
- Power Consumption: Rated: 58 W (1/8 W output, 1 kHz sine wave, 4 Ω), Idle: 18 W
- Dimensions (W × H × D): 214 mm × 44 mm × 298 mm (excluding protrusions and Bluetooth antenna)
- Weight: 2.5 kg
- Product Code: MA-BT240
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country.
Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.