LD Systems MAUI 11 G2 Column PA System with Cover and Bag

Full Description

The sought-after seal of quality

The Red Dot Product Design award. One of the most prestigious awards that can be bestowed upon any creation. Only products with a truly outstanding design can be given the Red Dot seal of quality. That's because this system was designed for complete PA performance, while making it easy to set up, take down, and move between venues.

Sonically rich

There are countless configurations when it comes to speakers and PA systems. It can be hard to figure out what you need for any given situation. But LD Systems have worked tirelessly to ensure that the MAUI 11 G2 delivers an incredible sound, every single time you switch it on.

A 1000W (peak) Class-D amplifier drives the MAUI 11 G2's unique driver configuration, delivering clean, efficient power with exceptional reliability. Three 6.5'' woofers pump out tight, defined, and punchy low frequencies. Two 1'' neodymium tweeters ensure that your highs are reproduced with absolutely no loss of detail. And eight 3'' full-range drivers handle everything in between, delivering a rich and warm mid-range.

Connect with confidence

Hook up your sound sources with ease. An integrated 4-channel mixer with line, mix, MP3, and Hi-Z inputs lets you connect everything from instruments to media players in seconds. You can even connect a wide variety of devices wirelessly via Bluetooth. Intuitive controls mean you can set the levels of your inputs, as well as your system, directly from the back of the system itself.

Done with distortion?

You're not alone. Distortion can be a nightmare for any performer, and it's not always easy to get rid of. Until now. The Maui 11 G2 features powerful DynX® DSP that means your sound remains distortion-free, even at the system's maximum volume. So your audience can hear every aspect of your sound with the upmost clarity.

In the bundle

• LD Systems MAUI 11 G2 Column PA System
• LD Systems MAUI 11 Sub Padded Slip Cover
• LD Systems MAUI 11 Column Speaker Bag

Features

• All-in-one column speaker for PA and monitor applications
• 1000W (peak) Class-D amplifier provides high power in a lightweight design
• Powerful bass reproduction with 3 x 6.5'' LF woofers
• Balanced mid-range thanks to the 8 x 3'' full-range speakers
• Precise and silky highs with 2 x 1'' HF tweeters
• Increased range and wider coverage through the array arrangement
• Homogeneous dispersion pattern through a BEM-optimised tweeter waveguide
• Distortion-free sound, even at the highest volume, thanks to DynX® DSP technology
• Full control though a 4-channel mixer, including Bluetooth® stereo audio streaming
• Two-piece column provides a compact transport solution for your system
• Secure plug-and-play connection thanks to the wireless multi-pin mechanism
• Wide range of application options through dismountable columns
• Easy operation with presets for mono or stereo configurations

Specifications

System

• Maximum SPL: 124dB (peak)
• Frequency Response: 50Hz - 20kHz
• Dispersion: 120° x 20° (H x V)
• Overall Height: 2030mm
• Weight: 24.9kg
• Product Code: LDMAUI11G2

Subwoofer

• Woofers: 3 x 6.5'', ferrite magnets, 1.5'' voice coils, custom-made
• Cabinet: 15mm plywood, bass reflex design
• Finish: Textured paint
• Dimensions: 285mm x 650mm x 373mm (W x H x D)
• Weight: 16.9kg

Mid/Hi System

• Midrange Transducers: 8 x 3'', ferrite magnets, 1'' voice coils, custom-made
• Tweeters: 2 x 1'', neodymium magnets, 1'' voice coils, custom-made
• Horn: Waveguide
• Loudspeaker Inputs: 1 x custom-made multipin
• Cabinet: Aluminium, closed design
• Finish: HD coating
• Dimensions: 96mm x 620mm/730mm x 104mm (W x H x D)
• Weight: 2.6kg

Amplifier

• Type: Class-D
• System Output: 500W (RMS) / 1000W (peak)
• Protection: DC protection, Multiband limiter, Short circuit, Thermal overload
• Cooling: Covection
• Line Inputs: 2 x stereo (RCA, XLR/6.3mm jack)
• Line Outputs: 1 x direct out (XLR)
• Mic Inputs: 1 (XLR/6.3mm jack)
• MP3 Inputs: 1 (3.5mm jack)
• Hi-Z Inputs: 1 (6.3mm jack)
• Loudspeaker Outputs: 1 x custom-made multipin
• DSP Characteristics:
  • Bit Depth AD/DA Converter: 24-bit
  • Internal Sampling Frequency: 48kHz
  • Signal-to-Noise Ratio: 100dB
• Power Connector: IEC (power cable included)
• Voltage: 100-240V, 50/60Hz (auto switching)
• Power Consumption: 11W (on) / 600W (max.)