Full Description
View Full Description
Premium power
Engineered for quality. Lab Gruppen's PDX series has been designed to deliver phenomenal power with outstanding performance and reliability. The PDX3000 provides you with two channels, each capable of producing 1500W of Class-D power, making it ideal for entry- and mid-level PA applications.
The amp utilises Lab Gruppen's unique IDEEA Class-D output stage, which has been precisely matched to the rated power output. What's more, you can use each channel to drive 2, 4, or 8 Ohm loads without having to reconfigure the amp. This is thanks to an intelligent design with plenty of voltage swing and current capacity, and a permanently bridged output.
Flexible processing
Take control. With Lab Gruppen's PDX Controller software, you can configure the PDX3000's DSP to sculpt the perfect sound. Take advantage of the ability to adjust crossovers, cut and boost frequencies with 8-band parametric EQ and 2-band dynamic EQ, adjust delay from 0 to 300ms, protect your sound with the limiter, and more.
You can connect the amp to your computer via the rear-panel USB port, providing you with intuitive and comprehensive control over the PDX3000's processing power. You can control the amp itself via the software too, or you can make use of the intelligently-designed front panel and LCD display. The PDX3000 is ideal for both installed and touring applications, and provides you with the ability to craft your sound with ease.
Built to last
Rugged, rackmountable, and built with premium components. The PDX3000 is in it for the long haul. The chassis itself is crafted from aluminium with a hard-wearing finish, keeping each and every aspect of your amplifier safe. The PDX3000 is also equipped with Neutrik NLT4 SpeakON outputs for reliable connectivity to your loudspeakers. You can easily mount the PDX3000 in a rack case too, so you can store, transport and use your amp with complete confidence.
Features
- Two channel power amplifier delivering 2 x 1500W
- Full DSP feature set for powerful loudspeaker processing
- Proven and reliable Class-D amplifier stage
- Highly-efficient switch mode power supply (SMPS)
- Comprehensive configuration and monitoring software through USB connection
- Intuitive front panel interface for easy setup and monitoring
- Precise power management guarantees performance and efficiency
- Comprehensive circuit protection against short circuits, DC and thermal overload
- User-configurable gain, delay, crossover, EQ, limiter, and dynamic EQ
- Speaker Protect Limiter for maximum level output and reliable driver protection
- Pre-configured crossover settings for speaker configuration
- Balanced XLR and TRS input connectors with optimised sensitivities
- Professional Neutrik SpeakON output connectors
- Front panel locking functionality for keeping your settings safe
- Efficient cooling with temperature-controlled fans
- Rugged and lightweight rackmount chassis provides maximum durability
- Designed and engineered in Sweden
- Covered by Lab Gruppen's 10-year warranty program
Specifications
- Channels:
- Amplifier: 2
- Processing: 2
- Peak Output:
- Wattage of All Channels Driven: 3000W
- Voltage per Channel: 115V
- Current per Channel: 32A
- Bridge Mode: No
- Output Circuit Type: Class-D
- Max Output Power: (All channels driven)
- 2 Ohms per Channel: 1000W
- 4 Ohms per Channel: 1500W
- 8 Ohms per Channel: 800W
- THD+N:
- 20Hz-20kHz at 1W: Less than 0.1-percent
- At 1kHz, 1dB Below Clip: Less than 0.1-percent
- Signal-to-Noise: Greater than 90dB
- Channel Separation: Greater than 75dB (crosstalk) (at 1kHz)
- Frequency Response: 10Hz - 20kHz, +0.5/-1dB
- Input Impedance: 10 k Ohms unbalanced, 20 k Ohms balanced
- Internal Sample Rate: 96kHz
- Product Propagation Delay: 0.6ms
- Distortion: Less than 0.1-percent (1/8 rated power)
- Front Controls:
- Power switch
- Gain (channels A and B)
- DSP section rotary push-encoder
- Buttons for Process, Setup, Up, Down, Exit
- Remote Controls: Via USB for PDX Controller software running on a computer
- Display: LCD 128x32, white text on black background
- Indicators:
- Power: RDY LEDs lit green
- Limit: LIM LEDs lit red (per channel)
- Signal: -24dB, -12dB, -6dB LEDs lit green (per channel)
- Thermal Warning: Per Channel - RDY LED blink orange / 90-percent, PSU - Both RDY LEDs blink orange
- Thermal Fault: Per Channel - RDY LED blink red / 100-percent, PSU - Both RDY LEDs blink red
- Fault: Channel - RDY LED constantly lit red / Device - Both RDY LEDs constantly lit red
- DSP:
- Delay: 0-300ms
- Crossover: 3 filter types, up to 48dB/oct.
- EQ: 8-band parametric, 2-band dynamic
- Limiter: Zero attack limiter (peak)
- Presets: 20 total presets, 19 user-definable
- Input/Link Connectors: 2 x XLR, 2 x 1/4'' TRS
- Output Connectors: Neutrik SpeakON (2 x NLT4)
- USB Connector: Rear panel USB connector type B for remote control of DSP section with PDX controller software
- Mains Connector: Locking IEC appliance inlet, C14
- Cooling: Two fans front-to-rear air flow, temperature controller speed
- Amplifier Protection: Thermal and DC protection, Rail sensing and peak current limiting
- Load Protection: Controlled start and shutdown behaviour, DC-fault protection, Short-circuit protection
- Voltage: 220-240V, 50/60Hz
- Power Consumption: 1050W (at 4 Ohms, rated power)
- Finish: Black painted aluminium chassis and grey front
- Approvals: CE, UL (ANSI/UL, CAN/CSA), PSE, RCM, CCC, FCC
- Dimensions: 93mm x 483mm x 326mm / 3.7'' x 19'' x 12.8'' (H x W x D)
- Weight: 6.5kg / 14.3lbs
- Product Code: PDX3000
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country.
Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.
