Line 6 XD-V55 Digital Wireless Handheld Mic System

Full Description

Select and go

Simply pick any of the four microphone models available in the Line 6 XD-V55 Digital Wireless Handheld Mic System (SM58, SM57, e835 and Line 6's custom), let the transmitter and receiver lock together and you're good to go. It really is that simple. You are then guaranteed a rocksteady connection up to 300 feet from the receiver, with full dynamic range genuinely providing the sound quality of a wired microphone. Your only restriction from this point is battery life, with easy-to-read LEDs on the polycarbonate handheld transmitter making you constantly aware of battery status. The ease of use really is unparalleled.

2.4GHz broadcast- license-free, worldwide

Interference is a worry of the past. Thanks to the 2.4GHz ISM band that the XD-V systems all operate on, competing signals, government restrictions, and interference are all avoided. These systems are all fully FCC compliant and therefore operate license-free worldwide. Unique addressing and encoding digital transmission technology blocks interference from Wi-Fi and Bluetooth® and always maintains a clear connection between transmitter and receiver.

Features and Specifications

• 300-foot extended range
• 24-bit precision audio for a full frequency response of 10Hz to 20kHz and a wide dynamic range of up to 117dB (A weighted)
• 12 channels to be used in up to 12 systems simultaneously
• Encoded DCL technology
• Fully FCC compliant
• Tough-yet-lightweight polycarbonate transmitters and receiver

Handheld Transmitter Features

• Dynamic microphone capsule with cardioid polar pattern
• Interchangeable microphone capsule compatible with other industry-standard mic capsules
• Channel selector to match channels with the receiver
• Lock mode to prevent accidental changes mid-performance
• Power control

Specifications

System

• Frequency Band: 2.4GHz ISM Band
• Compatible Channels: 12
• Spatial Diversity with Digital Buffering: Yes
• Frequency Diversity: Yes (2 frequencies per channel)
• Compander-Free Design: Yes
• Frequency Response: 10Hz (-0.5dB) to 20kHz (-2.5dB)
• THD: 0.03-percent typical
• System Latency: Less than 2.9ms (audio input to output)
• Construction:
  • Receiver: Extruded aluminium chassis
  • Transmitter: Metal enclosure

Receiver

• RF Performance Monitoring: Yes (via LCD screen and LED)
• RF Signal Strength Indicators: 5-segment LED
• Audio Level Meter: 5-segment LED
• Dynamic Filter: Yes
• Squelch and Pad Adjustments: None required
• Number of Receiver Antennas: 2
• Power Requirements: 9Vdc, 500mA
• Output Impedance:
  • XLR: 150 Ohms, balanced
  • 1/4'': 1 k Ohm, unbalanced
• Sensitivity: -95dBm
• Image Rejection: 56dB
• Antenna Distribution: A and B
• Antenna Impedance: 50 Ohms

Transmitter

• RF Output Power: 10mW
• Battery Life: 8 hours
• Mic Modelling: Yes (4 selectable models)
• Power Supply: 2 x AA alkaline batteries
• Battery Display: LCD screen on transmitter
• Dynamic Range: Greater than 113dB
• Audio Polarity: Positive pressure on mic diaphragm produces positive voltage