Neumann V402 Microphone Preamp

This product is currently unavailable for delivery to your country

Key Features

  • Provides purest possible signal
  • Features two state of the art transformless preamps and instrument inputs
  • Accurate monitoring with transparent headphone amplifier
  • Ideal for touring thanks to rackmountable design

Neumann V402 Microphone Preamp Overview

A modern classic. Preserve the integrity of your signal with the Neumann V402 Microphone Preamp. This is the first preamp that Neumann have launched since the groundbreaking V 476b in the 80s, which is still highly sought after. Whether they're modern or vintage designs, Neumann products have never been anything short of groundbreaking and the V 402 is a testament to this.



The V402 features two transformerless preamps and high impedance instrument inputs. These are designed to reinforce the sonic image presented by the microphone and instrument. That means what you hear in the room is what you'll hear in the speakers. The V 402 is designed to project your sound to be heard by the masses. Free from the risk of colouration, noise, and artefacts that can be introduced when using other preamps. The V 402 is as pure as it gets.



With a sleek, stylish, white fascia, all the controls are laid out in an intuitive manner for easy operation. The V 402 will be an incredible asset to your set up and is well worthy of the Neumann name.

Product Ref: 162654

Full Description

View Full Description

Sonic integrity

The connection points on the V402 are designed to provide you with the purest signal possible. The direct injection inputs will capture the full bodied sound of guitars, basses, and synths, without any colouration or degradation of signal. The switchable 20dB pad allows you to assert control over sources with high SPL (sound pressure levels) to prevent the risk of distortion. By engaging the high-pass filter, you'll be able to instantly remove undesirable, low frequency energy. This will save a great deal of time in the post-production stages and will take your mixes and recordings to the next level.

What's Included?

The V402 microphone preamp includes;

  • Three main cables (UK, US, EU)
  • Quick Guide
  • Safety Guide
  • Rubber feet

Features

  • Two-channel state-of-the-art transformerless microphone preamp
  • Two studio-quality instrument inputs with very high impedance
  • Switchable low-cut removes rumble without signal degradation
  • Exceptionally clean headphone amplifier
  • Easy monitoring mix with volume control for each channel
  • Handmade in Germany

Specifications

  • Frequency Range: 10Hz to >100kHz (-3dB @ 40dB Gain)
  • High Pass Filter: 60Hz, 12dB/Oct (Switchable On/Off)
  • Dimensions: 89mm x 463mm x 242mm (H x W x D)
  • Weight: 6.2kg
  • Product Code: 008682

Microphone Inputs

  • Connectors: 2 x XLR
  • Input Impedance: Approx. 3k Ohms
  • Minimum Gain: +20dB (PAD Off)
  • Maximum Gain: +60dB (PAD Off)
  • Attenuation PAD: -20dB, Switchable
  • Maximum Input Level:
    • PAD Off: +8dBu
    • PAD On: +28dBu
  • Power Supply: 48V, Max. 10mA (Switchable)

Hi-Z Inputs

  • Input Control: Switchable On/Off
  • Connector: 1/4" (6.3mm) Jack, Mono, Unbalanced
  • Input Impedance: 3.3M Ohms
  • Maximum Input Level: +21dBu
  • Minimum Gain: 0dB (PAD Off)
  • Maximum Gain: +40dB (PAD On)

Outputs

  • Connectors: 2 x 3-Pin XLR
  • Output Impedance: Approx. 200 Ohms
  • Maximum Output Voltage: +26dBu into 1k Ohms Load Impedance
  • Ground Lift: Switchable On/Off

Headphone Output

  • Output Type: Switchable Mono/Stereo
  • Connector: 1/4" (6.3mm) Jack, Stereo
  • Volume Control: Left + Right Channel + Master
  • Output Impedance: Approx. 2 Ohms
  • Maximum Output Voltage: +20dBu into 150 Ohms Load Impedance

| Reviews of our service

Showing our latest reviews
View all
×
Oops! There was an error retrieving our TrustPilot reviews. Please, try again later.