Key Features
- Fill your venue with precise sound thanks to a 10" woofer and 1" tweeter
- Capable of high volumes with 300W RMS power onboard
- Tailor your sound in seconds via three DSP presets
- Perfect for portable and fixed applications with M8/M10 suspension points
OFFLINE Omnitronic PAS-210A MK3 10" Active PA Speaker Overview
A great performance starts with great speakers. So optimise your live setup with the Omnitronic PAS-210A MK3. Offering power and punch, this active speaker fills your venue with clear, uncoloured sound. Tap into 300W of power and experience huge volumes. Whether you're a musician, DJ, or public speaker, your audience will hear every detail.
Accurate sound for professional results. The PAS-210A MK3 gets its superior audio quality from a 10" woofer and 1" tweeter. Both drivers work together to bring you deep lows, clear highs, and plenty of kick. Crank up the volume without distortion. Thanks to a bass reflex enclosure, you'll get enhanced projection, perfect for the most demanding of applications.
Versatile and easy. Whether used for portable of permanent installation, the PAS-210A MK3 can be setup in minutes. Suspend via trussing with integrated M8/M10 flight points. Position on stands via a dual flange mount receptacle. Or use as a floor monitor thanks to a trapezoid enclosure design. You're always ready to put on a show, no matter what the occasion.
Product Ref: 167088
Full Description
View Full DescriptionFor performers who demand the best
It can be hard to achieve great live sound. That’s why the Omnitronic PAS-210A MK3 has been designed to make it easy for everyone. Tap into unrivalled performance from an onboard DSP. Intuitive digital signal processing lets you quickly adjust your sound to match the demands of your venue. Three EQ presets help you dial your audio, offering DJ, monitor, and flat operation modes. Taming your low frequencies is easy thanks to a switchable low cut. No matter where you perform, you’ll always get sound that everyone can enjoy.
Features
- Full-range top speaker, perfect for portable and permanent live sound applications
- Reach high volumes without distortion thanks to 300W RMS output power
- Ideal for use as a satellite speaker or floor monitor with a multi-functional trapezoid cabinet
- Powerful bass response from a 10” woofer
- Clear highs from a 1” compression driver
- Improved transient response from custom designed voice coils
- Enhanced projection with reduced resonance thanks to a bass-reflex system
- Tame unruly bass frequencies with the switchable low cut (120Hz, 90Hz)
- Best in class performance from an onboard DSP
- Get the best sound in seconds thanks to three EQ presets with indicators
- Monitor your speaker’s performance with master control, limit, signal, and power LEDs
- Easy to link other active speakers via XLR output
- Pristine signal integrity via XLR/6.3mm Jack, switchable mic/line
- Optimised for combination with PAS subwoofer
- Fully protected against overload with switch-on delay and limiter
- Easy to position thanks to a dual flange with 0-degree – 5-degree tilt angles
- Safe and secure suspension via M8/M10 threaded inserts
- Transport with confidence thanks to a scratch-resistant lacquer surface
- Excellent protection for your drivers from a protective grille
- Transport with ease using the ergonomic recessed handles
Specifications
- Power Supply: 230V AC, 50Hz
- Power Consumption: 350W
- Output Power: 300 W RMS
- Power Connection: Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
- Frequency Range: 65Hz – 20kHz
- Max. SPL: 121dB
- DSP: Yes
- Dispersion Angle: 90-degrees x 60-degrees
- Attachment Angle: Ø 35mm variable tilt
- Flying Points: 5 x M8 thread; 4 x M10 thread
- Circuitry: Class D
- Connections: Input: via 3-pin XLR/6.35mm jack (F) combination socket (mounting version), Link: via 3-pin XLR
- Input Channels: 1 x mono with Mic-line switch via XLR, channel control via Rotary knob
- Speakers: 1 x compression tweeter highs (1") approx 2,5 cm with ferrit magnet, Basket material aluminium, Voice coil compression tweeter highs (1.5") approx 4 cm, Horn vent (1") approx 2,5 cm, 1 x woofer (10") approx 25 cm with ferrit magnet, Voice coil lows (2.5") approx. 6.35 cm
- Material: Birch multiplex
- Colour: Black, painted
- Dimensions: 32cm (W) x 30cm (H) x 52.5cm (D)
- Weight: 14.4kg
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.
| Reviews of our service
View all