This product is currently unavailable for delivery to your country
Key Features
- Converts pre-polarised condenser mics with a 3-pin LEMO connector to 3-pin XLR
- Ideal for use in both wired and wireless applications for maximum functionality
- Integrated switchable gain and switchable low-frequency roll-off filter
- Compact and rugged design with a handy belt clip for unobtrusive operation
Sennheiser MZA 900 P-4 In-Line Phantom Power Adaptor, 3-Pin LEMO Overview
Intelligent and flexible. The Sennheiser MZA 900 P-4 In-Line Phantom Power Adaptor is the ideal solution for connecting your condenser microphone with a 3-pin LEMO output connector to an XLR microphone input. The adaptor converts the phantom power fed to it, and supplies it to your microphone so you can get even more functionality out of your mic. You can make full use of your mic in a wired configuration in the studio, as well as wirelessly with a compatible transmitter. An integrated roll-off filter and switchable gain allow additional control over your signal. Plus, with a rugged metal chassis, you can be sure that your MZA 900 P-4 will perform reliably for years to come.
This adaptor is designed to work with the Sennheiser HSP 2, HSP 4, HS 2, ME 102, ME 104, ME 105, MKE 2-4, and MKE Platinum-4-C microphones.
Product Ref: 128935
Full Description
View Full DescriptionIn The Box
- 1 x Sennheiser MZA 900 P-4 In-Line Phantom Power Adaptor, 3-Pin LEMO
- Instructions
- Warranty Certificate
Features
- Used for connecting pre-polarised condenser mics to microphone inputs with 10-52V phantom power (P12 - P48)
- A quick and flexible solution for mics to be used in both wired and wireless applications
- Can be used with the following Sennheiser microphones:
- HSP 2
- HSP 4
- HS 2
- ME 102
- ME 104
- ME 105
- MKE 2-4
- MKE Platinum-4-C
- HSP 2
- One and the same microphone can be used together with the adaptor for wired applications, or with a compatible transmitter for wireless use
- Can also be used as a cable tested for XLR microphone cables
- Rugged metal chassis
- 0/-12dB switchable gain
- 125Hz (-3dB), 12dB/oct switchable roll-off filter
- Two-colour control LED (phantom power, audio peak)
- Lockable 3-pin LEMO input socket
- Male 3-pin XLR output socket
- Fitted with a handy belt clip
Specifications
- Input Connector: Locking 3-pin SE jack socket
- Output Connector: XLR-3M
- Gain: 0/-12dB
- Output Voltage:
- P12: 0.6V at 0dB gain
- P48: 1.8V at 0dB gain
- Phantom Powering: P12 - P48, 10 - 52V, 2.6 - 2.8mA
- Frequency Response: 20Hz - 20kHz
- Output Impedance: 100 Ohms
- Nominal Impedance: 100 Ohms
- Minimum Terminating Impedance:
- At 0dB Gain: 5k Ohms (P12 - P48)
- At -12dB Gain: 2k Ohms
- Operating Temperature: -20°C to +60°C
- Length: 100mm
- Diameter: 19/22mm
- Weight: 60g
| Reviews of our service
View all