Shure GLXD6 Wireless Guitar Pedal Receiver

Full Description

LINKFREQ Automatic Frequency Management

The Shure GLXD6UK Wireless Guitar Pedal Receiver features the LINKFREQ Automatic Frequency Management system, greatly improving signal stability. This system works by continuously scanning the available frequency spectrum and automatically selecting the best open channel, with no audio interruption. Combined with its true diversity operation, which compares and selects the strongest signal from the device's two independent antennae, this system ensures that the receiver always delivers consistent, crystal-clear audio.

Rechargeable Lithium Ion Batteries

The GLXD6UK features Shure's proprietary Lithium Ion batteries, which provide up to 16 hours of continuous use. These batteries can be charged using a variety of car, wall or USB chargers (sold separately).

• 3 hour charge: Up to 16 hours use
• 1 hour charge: Up to 6 hours use
• 30 minute charge: Up to 3 hours use
• 15 minute charge: Up to 1.5 hours use

Integrated Tuner Function

In addition to its function as a wireless receiver, the Shure GLXD6UK features an integrated guitar tuner function, making this the perfect addition to your pedal board setup. Selected by using the convenient footswitch, the tuner function enables both strobe and meter tuning via a highly visible LED display. The device also features modes to set the audio output to either Live or Mute when the tuner is engaged.

Features

• Strobe & metre tuning options, tune while mute or live
• Allows operation with up to 8 compatible systems
• Hi-resolution LED display
• 20 Hz to 20 kHz
• 120 dB dynamic range
• 24 bit LINKFREQ quickly identifies the best open channels and enables the transmitter to automatically follow any frequency change on the receiver without signal interruption by automatically and seamlessly switching to backup frequencies.

Specifications

• Power Supply: PS23 (sold separately)
• Housing: Cast Metal, Black Powdercoat
• Power Requirements: 9 to 15 V DC (negative ground), 250 mA
• Spurious Rejection: >35 dB, typical
• Gain Adjustment Range: -20 to 40 dB in 1 dB steps
• Configuration:
• 6.35 mm (1/4") output: Impedance balanced
• Impedance 6.35 mm (1/4") output: 100 Ω (50 &Omega, Unbalanced)
• Maximum Audio Output Level 6.35 mm (1/4") connector (into 3 kΩ load): +8.5 dBV
• Receiver Antenna Input:
• Impedance: 50 Ω
• Maximum Input Level: -20 dBm

• Transmission: Digital On 2.4GHz
• Receiver Housings: Metal
• Bias via BNC:
• High Density Mode: No
• Interference Detection: No
• Remote Control: Yes
• Number Of Compatible Systems Per Frequency Band: 8
• DANTE Audio Network Interface: No
• Scan Features: Channel Scan, Group Scan
• Sync Features: Pairing (2.4GHz)
• Detachable Antennas: No
• Logic: No
• Cascade: No
• Receiver Displays: LEDs
• Receiver Type: Pedal Board
• Included Antenna: External 1/2 Wave
• Battery Status: Leveled Battery Life Indication
• Line Mic Switch: No
• RF Sensitivity: -88 dBm, For 12dB SINAD, Typical
• Phantom Power Protection: Yes
• Spurious Rejection: 35 dB, Typical
• Antenna Input Impedance: 50Ω
• Tuning Range: 2400MHz
• Tuning Accuracy: ±1 Cent
• Housing: Cast Metal, Black Powdercoat
• Weight: 504 g
• Dimensions
  • Height: 46 mm
  • Width: 95 mm
  • Depth: 133 mm