Shure PSM300-K3E Wireless IEM System, Including Bodypack Receiver

Full Description

Professional sound

The PSM300 system provides crystal clear, detailed sound with 24-bit digital audio directly from this unit to your bodypack receiver. It also utilises Shure's Audio Reference Companding technology to provide clean, artifact-free sound and reduces noise to an absolute minimum. Whatever you need to hear most while on-stage, this transmitter will send the purest version of that signal to your bodypack.

Intuitive and convenient

This wireless monitoring system is extremely fast and easy to use, one-touch sync automatically scans for the cleanest frequency in its bandwidth so you can quickly set up and hear your personal mix with absolute clarity. The transmitter offers balanced inputs and outputs for setting up multi-receiver monitoring for large performances. Meanwhile, the receiver's MixMode® technology allows you to control stereo balance to help dial in your mix's imaging so you hear every element of your performance.

P3T Wireless Transmitter Features

• Reliable wireless transmitter for Shure's PSM300 wireless in-ear monitoring system
• Comfortably fits into any live rack with its space-saving half-rack size and included rack mount kit
• Sends a stereo or mono mix wirelessly to bodypack receivers on-stage
• Reliable and dropout-free RF performance
• Transmits to receiver with a range of over 300 feet
• One-touch sync links transmitter and receiver instantly
• Up to 30 mW of output power (region dependent)
• Broad tuning range up to 24 MHz (region dependent) makes it easy to find a clear channel
• 1/4" (6.3 mm) TRS balanced inputs and loop outputs for connectivity with mixers and other P3T units
• Clear, high-contrast LCD menu with detailed stereo output metering for accurately setting levels
• Detachable antenna included for improved RF stability
• External power supply provides consistent power without having to worry about battery life
• Selectable line/aux level

P3R Wireless Bodypack Receiver Features

• Professional bodypack receiver for Shure's PSM300 in-ear monitoring system
• Lightweight but durable plastic construction
• MixMode® technology enables customisation of two channels of monitoring mixes
• Stereo mode provides adjustment of left-right balance to achieve an even sound
• Frequency scanning and infrared sync finds a clean channel quickly and automatically
• Two AA batteries offers up to six hours of continuous use
• Power and battery status LED through 5-segment metering
• Power save mode extends battery life when earphones are not in use

PSM300 IEM System Specifications

• RF Carrier Range: 488 - 937.5 MHz
• Compatible Frequencies: Per band, up to 15
• Tuning Bandwidth: 24 MHz maximum, note: varies by region
• Operating Range: Environment dependent, 90 m (300 ft)
• Audio Frequency Response: 38 Hz - 15 kHz
• Signal-to-Noise Ratio: A-Weighted, 90 dB (typical)
• Total Harmonic Distortion: ref. ± 34 kHz deviation @ 1 kHz <0.5% (typical)
• Companding: Patented Shure Audio Reference Companding
• Spurious Rejection: ref. 12 dB SINAD >80 dB (typical)
• Latency: <0.7 ms
• Frequency Stability: ±2.5 ppm
• MPX Pilot Tone: 19 kHz (±1 Hz)
• Modulation: FM, MPX Stereo (ref. ±34 kHz deviation @ 1 kHz)
• Operating Temperature: -18°C tp +63°C

P3T Wireless Transmitter Specifications

• RF Output Power: 10, 20, 30 mW (varies by region)
• RF Output Impedance: 50Ω (typical)
• Net Weight: 783 g (27.6 oz.)
• Dimensions (H x W x D): 43 x 198 x 172 mm (1.7 x 7.8 x 6.8")
• Power Requirements: 12 - 15 V DC, 260 mA maximum
• Input Connector Type: 6.35 mm (1/4") TRS
• Polarity: Tip positive with respect to ring
• Input Configuration: Electronically balanced
• Input Impedance: 40 kΩ (actual)
• Nominal Input Level: Switchable, +4 dBu, -10 dBV
• Maximum Input Level:
  • @ +4dBu: +22 dBu
  • @ -10 dBV: +12.2 dBu
• Pin Assignments: Tip = hot, Ring = cold, Sleeve = ground
• Phantom Power Protection: Up to 60 V DC
• Output Connector Type: 6.35 mm (1/4") TRS
• Output Configuration: Electronically balanced
• Output Impedance: Connected directly to inputs

P3R Wireless Bodypack Receiver Specifications

• Frequency Band: K3E, 606 - 630 MHz
• Active RF Sensitivity (at 20 dB SINAD): 2.2 µV
• Image Rejection: >90 dB
• Adjacent Channel Rejection: >60 dB
• Intermodulation Attenuation: >50 dB
• Blocking: >60 dB
• Audio Output Power: 80 mW (per output) (1 kHz @ <1% distortion, peak power, @32Ω)
• Minimum Load Impedance: 16Ω
• Headphone Output: 3.5 mm (1.8") stereo
• Net Weight: 98 g (3.5 oz.) (without batteries)
• Dimensions (H x W x D): 110 x 64 x 21 mm
• Battery Life (continuous use): 5 - 7 hours, AA batteries