This product is currently unavailable for delivery to your country
Key Features
- Wideband UHF (470-952 MHz) 5-way antenna splitter and power distribution system
- Easy-access, front-mounting antenna hardware
- DC output for antenna bias (12 V, 300 mA max.)
- Locking power supply and BNC cables available
Shure UA844+SWB Antenna Distribution System Overview
The Shure Model UA844+ is an antenna distribution system that allows for the expansion of wireless microphone systems by splitting one pair of antennas to multiple receivers. It also amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs. A single UA844+ system can support up to five wireless receivers. A maximum of five UA844+ systems may be used in a two-tiered configuration.
It seems like there's never as much time as you'd like for the sound check. That's why the UA844+SWB Antenna Distribution System lets you stretch the power of your antenna pairs, giving you more on-air channels in less setup time. So you can set and forget, and have more flexibility to make sure it all sounds perfect.
The five-way output distributes the signal and power to multiple receivers, enabling more efficient deployment, even as you cascade multiple distros. So your rack can travel with you from venue to venue, and let you set up fast for flawless sound.
Product Ref: 157736
Full Description
View Full DescriptionWhat's Included
- 1 x Shure UA844+SWB Antenna Distribution System
- 2 x 6 ft. (ca. 1,8 m) BNC cables
- 10 x 22 in. (60 cm) BNC cables
- 4 x Locking DC power cables (for ULX4D, ULXP4)
- 4 x Non-locking DC power cables (for QLXD4, SLX4, BLX4R)
- 2 x Bulkhead adaptors
- 1 x Rack mount Hardware kit
- 1 x PS60 Power supply
Features
- A four DC feed powers additional receivers without having to run more cable.
- Easy-access, front-mounting antenna hardware
- DC output for antenna bias (12 V, 300 mA max.)
- Locking power supply and BNC cables available
Compatibility
- Supports QLX-D, ULX, ULX-D, SLX and BLX receivers (BLX4R only)
Specifications
- Power Requirements: 14 to 18 V DC
- DC Output: 14 to 18 V DC (x4)
- Output Current: Combined total from all DC outputs 2.5 A, maximum
- Operating Temperature Range: -18°C (0°F) to 63°C (145°F)
- Dimensions: 45 x 483 x 172 mm (H x W x D)
- Net Weight: 1.62 kg (3.6 lbs)
- Connector Type: BNC
- RF Frequency Range: model dependent 174 to 1805 MHz
- Bias Voltage: 15 V DC (150 mA, maximum) (x2)
- Impedance: 50 Ω
- RF Frequency Range: model dependent 174 to 1805 MHz
- Output Intercept Point: 21 dBm, typical
- Connector Type: BNC
- Impedance: 50 Ω
- Output Connector Isolation: 30 dB, typical
- Gain: Input to any output port (Unused ports terminated in 50 Ω) -1 to +1 dB
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.
| Reviews of our service
View all