OFFLINE Shure VP89L Long Shotgun Microphone

Full Description

Premium Features

The Shure VP89L Long Shotgun Microphone boasts a range of professional, broadcast quality features. A built-in premium preamplifier features high RF rejection, ensuring interference-free recording. While an internal roll-off filter for low frequencies combats unwanted bass noise. The Shure VP89L’s incredibly narrow pickup angle makes capturing individual sounds over long distances simple. And without compromising clarity. Shure’s quality durable design means this microphone is well-suited to work in the field. And a whole-host of included accessories mean you’re ready to record at a moment’s notice.

Modular Mic’ing

The VP89L is compatible with Shure’s range of other VP89 capsules. Select the right tool for the job. The included preamp can be combined with other length capsules (short and medium). Easily alter pickup angles and off-axis rejection levels to better capture sources at varying distances. With Shure’s modular microphone system it’s as easy as changing a capsule.

In the Box

• Shure VP89L Long Shotgun Microphone x1
• PVC protective case x1
• Foam windscreen x1
• Microphone clip
• 5/8” to 3/8” thread adapter

Features

• Modular design with reduced visual appearance and easy handling (camera- or boom-mounted)
• Premium preamplifier design with RF immunity
• Internal low-frequency roll-off
• Recessed low-cut filter switch for additional control
• Targeting sources over long distances (sporting events, ENG, wildlife, and field-recording)
• Extremely narrow pickup angle
• Unmatched quality off-axis rejection for extremely low ambience
• Superior Shure design and rugged, roadworthy construction
• Carrying case and foam windscreen included
• Full range of complementary accessories

Specifications

• Cartridge Type: Electret Condenser
• Polar Pattern: Hypercardioid/Lobar
• Frequency Response: 40 – 20,000 Hz
• Output Impedance: 115.0 Ω
• Sensitivity (open circuit voltage, @ 1 kHz, typical): -33.5 dBV/Pa[1] (21.1 mV)
• Maximum SPL (1 kHz at 1 THD): 2500 Ω load: 132.0 dB SPL; 1000 Ω load: 128.5 dB SPL
• Signal-to-Noise Ratio: 79.0 dB
• Dynamic Range (@ 1 kHz): 2500 Ω load: 117.0 dB; 1000 Ω load: 113.5 dB
• Clipping Level (@ 1 kHz, 1 THD): 2500 Ω load: 4.0dBV; 1000 Ω load: 0.0dBV
• Self Noise (equivalent SPL, A-weighted, typical): 15.0 dB
• Common Mode Rejection (20 to 20,000 Hz): ≤70.0 dB
• Low-Frequency Filter Switch (-12 dB/oct below specified frequency): Flat Response: 100 Hz; Low Frequency Rolloff: 200 Hz
• Operating Temperature Range: -18°C (0°F) to 57°C (135°F)
• Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
• Operating Relative Humidity: 0 – 95
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Housing: Charcoal-grey metallic painted aluminum alloy handle and grille with stainless steel screen
• Power Requirements: 11–52 V DC phantom power (IEC-61938), <2.0 mA
• Weight: 174 g