This product is currently unavailable for delivery to your country
Key Features
- Clear, undistorted sound from a discreet, lightweight lavalier microphone
- Picks up the details of your voice with an omnidirectional condenser element
- Ensures professional audio with low-end roll-off and tailored frequency response
- Quick and easy to attach on clothing with included mounting accessories
Shure WL93 Lavalier Microphone with TQG connector Overview
The Shure WL93 Lavalier Microphone with TQG connector lets everyone focus on what's important - your voice. From broadcasting and presenting to theatres and houses of worship, you'll get clear, professional sound from a microphone that stays out of sight. It's perfect for public speakers who need to look as good as they sound.
Speak with confidence. The WL93 is fine tuned for clarity - no matter what the event. Enjoy undistorted sound at high volumes with a wide dynamic range, minimal clothing noise from a low-end roll-off, and bright, defined sound from an omnidirectional polar pattern with tailored presence rise.
All from a microphone that attaches to your clothing in minutes. Thanks to its small, discreet design, the WL93 can be mounted on ties, collars, buttonholes, and more. Get to work straight out of the box with the included mounting accessories, and step on stage without bulky equipment holding you back.
Product Ref: 179069
Full Description
View Full DescriptionWhat’s in the box
- 1 x Shure WL93 Lavalier Microphone with TQG connector
- 1 x Acoustic windscreen
- 1 x Dual mounting block
- 1 x Sew-on mounting bracket
Features
- Professional lavalier microphone for theatre, television, broadcasting, video, film, and sound reinforcement
- Precise, articulate sound from a subminiture condenser element
- Clear vocal pickup with an omnidirectional polar pattern
- Inconspicuous mounting hardware for almost invisible use
- Specially tailored to chest-worn microphone operation with a smooth, extended frequency response
- Helps your voice cut through with a presence rise in the frequency range
- Reduces clothing and room noise with a controlled low-frequency roll-off
- Undistorted sound, even at loud volumes thanks to a wide dynamic range
- Plug and play design with wide-range phantom power operation
- Easily mount your preamplifier (SM93) in pockets, on your body, or on clothing
Specifications
- Type: Condenser (electret bias)
- Frequency response: 50 to 20,000 Hz
- Polar pattern: Omnidirectional, uniform with frequency
- Output impedance: 3000
- Output level (1 Pascal = 94dB SPL): Open Circuit Voltage: –38 dBV/Pa (13 mV)
- Output clipping level (at 1,000 Hz): 0.25 V at 120 dB
- THD: Less than 1% at 120 dB
- Maximum SPL: 120 dB
- Dynamic range (maximum SPL to A-weighted noise level): 102 dB
- Output noise (equivalent SPL): 18 dB typical, A-weighted
- Hum pickup (electromagnetic): N/A
- Signal-to-noise ratio: 76 dB at 94 dB SPL (IEC 651)
- Polarity: Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)
- Recommended operating voltage: 2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4)
- Current drain: 40 A typical
- Environmental conditions: Operating temperatures: –18o to 57o C (0o to 135o F), Storage temperatures: –29o to 74o C (–20o to 165o F)
- Cable: Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type TA4F (WL93T: Tan 1.27 m [4.17 ft])
- Case: Black ABS thermoplastic case with stainless-steel-mesh grille
- Weight: 16 g (0.57 oz)
- Product code: WL93
| Reviews of our service
View all