Yamaha MG20 Analog Mixing Console - Nearly New

Full Description

Built to Last

The Yamaha MG Series of mixers feature a design and construction that will handle the standard wear and tear of the active musician. Featuring the steel chassis that is impact resistant and powder coated, this mixer will take any bumps and scratches without it getting damaged or looking old. The sleek design does not compromise any part of the finished product. A state of the art design allows for convection cooling, meaning your power unit will not overheat your unit after continuous use. Separating the power supply from the analog circuitry inside the mixer allows for near silent background noise, allowing for a serious and high quality output sound. As well as this, the knob placement has been put above the chassis of the console, thus not damaging circuitry underneath should the device ever be dropped or mishandled.

D-PRE Microphone Preamps

The MG20 mixer features newly refined D-PRE mic preamps that employ an inverted Darlington circuit design and deliver more power with lower impedance. Initially intended for use with Yamaha's high-end recording equipment, these discrete class-A preamps ensure your signal retains the original character and musical expression.

Studio-Quality Op-Amp

The head amp determines overall sound quality and the op-amp integrated circuits are one of the most important elements within the head amp circuit. All MG series mixers feature new, high-quality, custom-made MG01 op-amps that Yamaha have developed in cooperation with the semiconductor manufacturer. MG01 op-amps utilise redesigned circuitry in which even the internal components and wiring have been optimised to ensure exceptional resolution and transient responses.

1-Knob Compressors

Equipped with the innovative 1-knob Comp function, the Yamaha MG20 delivers optimal compression for both vocals and instruments. By simply operating a single control, as the knob is turned to the right, the threshold, ratio and output gain are all adjusted simultaneously.

Features

• 20 channel mixing console
• 16 microphone/20 line inputs (12 mono + 4 stereo)
• 4 GROUP buses and 1 stereo bus
• 4 AUX including FX
• ''D-PRE'' mic preamps with an inverted Darlington circuit
• 1-knob compressors
• PAD switch on mono inputs
• +48V phantom power
• XLR balanced outputs
• Internal universal power supply for world-wide use
• Rack mount kit included
• Rugged metal chassis

Specifications

• Inputs:
  • Mono: 12 Mic/Line
  • Mono/Stereo: 4
• Output Channels:
  • Stereo: 2
  • Monitors: 1
  • Headphones: 1
  • Aux Send: 4
  • Group: 4
• Buses:
  • Stereo: 1
  • GROUP: 4
  • AUX: 4
• Frequency Response: 20Hz - 20kHz, +0.5dB/-1.5dB
• Crosstalk: -78dB
• Pad: 26dB (Mono)
• HPF: 80Hz, 12dB/Oct (Mono/Stereo: Mic Only)
• Comp: 1-Knob Compressor (Gain/Threshold/Ratio)
  • Threshold: +22dBu to -8dBu
  • Ratio: 1:1 to 4:4
  • Output Level: 0dB to 7dB
  • Attack Time: 25msec
  • Release Time: Approx. 300msec
• EQ High:
  • Frequency: 10kHz Shelving
  • Gain: +15dB/-15dB
• EQ Mid:
  • Mono Frequency: 250Hz - 5kHz, Peaking
  • Stereo Frequency: 2.5kHz, Peaking
  • Gain: +15dB/-15dB
• EQ Low :
  • Frequency: 100Hz Shelving
  • Gain: +15dB/-15dB
• Level Meter: 2 x 12-Segment LED Meter
• Phantom Power: +48V
• Power Requirements: AC 100V - 240V, 50Hz/60Hz
• Power Consumption: 36W
• Dimensions: 444mm x 130mm x 500mm (W x H x D)
• Weight: 6.9kg