DISC SubZero 8" Active Studio Monitors and Subwoofer

Full Description

SubZero 8" Active Studio Monitor

Optimise your sound

If your speakers sound too bright, or bass heavy, don’t worry. This problem can easily be resolved by accessing the back panel. By engaging the HF and LF trim, you’re able to either subtly boost, or attenuate the high and low frequencies by +/- 2.5dB. The inclusion of switch controls makes the 8” active monitor a real work horse as it can easily accommodate to any space you’e recording, mixing, and mastering in. Whether you’re in the studio, or at home. You’ll be able to achieve excellent results you can trust, absolutely anywhere.

For global manipulation over the amplitude of your studio monitor, you can adjust the output volume at the rear of your speaker. The active studio monitor features A/V shielding. This always keeps your speaker sounding great by providing protection against electrical interference from laptops and monitor screens within close proximity.

Finest quality components

When sourcing parts, SubZero don’t skimp on quality. They strive to bring you the very best products available on the market. The use of a woven fibreglass driver cone and silk dome tweeter ensures an improved performance with detailed stereo imaging. This combined with the extended frequency response of 40Hz-22KHz guarantees an unparalleled listening experience. Something which is not common for monitors within this price range. Rest assured knowing these speakers hold their ground against competitors that are triple in value.

SubZero 10" Active Studio Subwoofer

Drone Cone Technology

This SubZero subwoofer is clever. Featuring 2 passive radiators (or 'drone cone' enclosure technology), the speaker gives a more enhanced bass response. The speaker itself has two additional cones on the side of the sub instead of a bass port (or hole). These cones aren't driven, they purely resonate from the air pressure within the cabinet created by the front speaker. The main advantage to this is that it avoids any spikes or troughs in the frequency response that would normally be generated by a bass port. It also means that, despite its compact size, it can generate a lot more sound while still remaining clear and transparent - perfect for studio monitoring.

High fidelity sound

Both the RCA and XLR inputs have been designed by SubZero to accept full range audio. This means you'll be able to directly connect your speakers to your sub without any fear of signal degradation. From there, the sub features an adjustable low pass filter, allowing you to precisely alter what frequency you wish the sub to handle. All that is left getting the volume balance just right between the subwoofer and the top speakers, which is also easily adjusted on the sub. Simply adjust the dial on the back panel to independently control the volume of the subwoofer without adjusting the volume of the top speakers.

Sounds as good as it looks

The SubZero subwoofer not only sounds superb, but has also been presented in an appealing, compact cabinet. Featuring a sturdy wooden frame for the enclosure, it's durable and practical. The high gloss finish makes it ideal both as a studio monitor, but also at home in the home, as part of a hi fi set up. Four rubber feet have been added to the bottom of the speaker for protection of floor surfaces and also to prevent unwanted resonance. All the cones feature a removable cover for additional protection.

At a glance monitoring

Thanks to the innovative LED colour scheme that the subwoofer offers, you'll be able to effortlessly check its status at a single glance. Green indicates the subwoofer is turned on. Red represents standy-by or "protect mode", a helpful overheat protection mode. This feature is excellent for ensuring a long-lasting life. Finally, orange indicates when clipping occurs, allowing you to reduce your signal level to prevent any damage to your system.

Specifications - 8" Monitor

• LF Driver Power: 75W RMS / 105W Peak / 300W Max
• LF Driver Size: 8"
• HF Driver Power: 25W RMS / 35W Peak / 100W Max
• HF Driver Size : 1"
• Inputs (Balanced): .+4dBu Line Level
• Inputs (Unbalanced): .-10dBV
• Cross Over Frequency : 2.3KHz
• Frequency Response: @ -3dB: 40Hz - 22KHz 
• Signal to Noise: 95dB
• SPL: 93DB
• Material / Finish: MDF, Black Satin textured PVC
• Weight: 10.5KG
• Dimensions (mm)(W x H x D): 268 x 395 x 280 mm 
• Product Code: SZSM-8S

Specifications - 10" Subwoofer

• Model: SZSM-SUB10
• Power Rating: 280W RMS / 400W Peak / 1120W Max
• Frequency Response: 30 Hz-100Hz & -3dB
• Signal to Noise Ratio: 90dB
• THD: Less than 0.5
• Input Impedance: 20Kohms
• Driver: 10"
• Dimensions (W x H x D): 385 x 355 x 380mm
• Product Code: SZSM-SUB10

The latest in music technology, for modern musicians and producers. SubZero combines innovation and quality, with the determination to help you get the sound you want. From studio and guitars, to powerful PA systems and home audio setups - SubZero is all about cutting-edge audio.