Full Description
View Full Description
Immersive sound reproduction for mixing/mastering
The KRK ROKIT RP5 G5 Studio Monitor is a two-way studio monitor system that delivers exceptional sound reproduction. The acoustic axis point, positioned between the tweeter and woofer, plays a crucial role in delivering optimal sound quality. To ensure the best listening experience, it is recommended to position the monitor so that the acoustic axis point is directly aimed at ear level from the listening position.
If needed, the studio monitor can be angled to precisely direct the acoustic axis in the desired direction. With bi-amplified Class D power amplifiers, these monitors ensure maximum transient response and dynamics reproduction while maintaining audio integrity during long work sessions. The KRK ROKIT RP5 G5 Studio Monitor is your gateway to achieving professional-grade audio production.
User-friendly LCD display with DSP presets and multiple modes
Featuring an LCD display, the KRK ROKIT RP5 G5 Studio Monitor provides a user-friendly interface that allows for easy navigation and sound customization. Upon powering on the monitor and completing the boot sequence, the home screen presents an overview of the system. It displays essential information such as the Level, Voicing Mode, and EQ setting. By rotating the FUNCTION knob, you can quickly adjust the level, or press the knob to access additional features like EQ and SETUP.
The ROKIT G5 series offers three distinct Voicing Modes to suit different listening scenarios. In Mix Mode, the monitor provides a flat frequency and phase response, making it ideal for precise mixing, mastering, and critical listening tasks. Create Mode offers a more inspirational voicing, perfect for writing, producing, and casual listening. Finally, Focus Mode emphasizes the midrange band, allowing for a critical analysis of vocals and instruments that occupy this frequency range. With these versatile voicing options, you can adapt the monitor to match different aspects of your audio production process.
Efficient level control and 25 EQ settings
The Level of the KRK ROKIT RP5 G5 Studio Monitor is set at the factory to 0 dB with a +4 dBu input sensitivity. To achieve your desired volume level or match it to other monitors in your studio, you can increase or decrease the Level in precise increments of 0.1 dB on both monitors. The Menu screen provides access to EQ settings, where you can make further adjustments to shape your sound. With 25 boundary and tuning EQ combinations, you have the flexibility to fine-tune the monitor's response to your specific studio acoustic conditions.
Features
- 5-inch two-way studio reference monitors
- Bi-amplified Class-D amplification provides massive headroom and power
- Three voicing modes - Mix, Focus and Create
- Rear-panel LCD display provides visual feedback
- 25 boundary and tuning EQs for various acoustic conditions
- Custom KRK transducer design provides optimised and improved response/accuracy
- 5-inch woven Kevlar aramid fibre cone woofer for superior damping and modal breakup control
- 1-inch silk dome copper cap magnate ferrite tweeter
- Front-facing bass reflex port for optimised low-end reproduction
Specifications
- Configuration: 2-Way Bass Reflex
- System Type: Active Studio Monitor
- Low-Frequency Driver: Woofer, 5-inch, woven Kevlar® aramid fiber cone, ferrite magnet
- High-Frequency Driver: Tweeter, 1-inch, Silk Dome, Copper Cap, ferrite magnet
- Frequency Response (+/- 3 dB): 54 Hz – 30 kHz
- Frequency Range (+3/-10 dB): 43 Hz – 40 kHz
- Crossover Frequency: 2.27 kHz
- Amplifier Configuration: Bi-amplified (Class D)
- HF Amp Power Output: 20 Watts
- LF Amp Power Output: 35 Watts
- Total Power: 55 Watts
- Total Dynamic Power Output: 130 Watts
- Max SPL: 104 dB
- Coverage Angles: 155° Horizontal x 126° Vertical
- Analog Input Connector: Balanced XLR / 1/4” TRS Combo
- Input Impedance: 5.12kΩ Balanced
- SNR (Signal to Noise Ratio): >101.5 dB (Low Sensitivity setting, balanced), >94 dB (High Sensitivity, unbalanced)
- AC Input Voltage: 100 – 240VAC (+/- 10 ), 50/60 Hz
- Fuse Type: 5x20 mm T1A 250V
- Enclosure Construction: PVC Vinyl Wrapped MDF
- Baffle Construction: Structurally Reinforced High Impact Polystyrene
- Product Dimensions (H x W x D): 11.34” (288 mm) x 7.52” (191 mm) x 9.53” (242 mm)
- Packaged Dimensions (H x W x D) - Single: 15.75” (400 mm) x 10.24” (260 mm) x 12.6” (320 mm)
- Product Weight - Single: 10.91 lbs. (4.95 Kg.)
- Packaged Weight - Single: 14.33 lbs. (6.5 Kg.)
- Optional Accessories: KRKSTDX68W1 Mounting Bracket and KRKSTDX4A1 35 mm Mounting Adapter
- Product Code: RP5G5-PAIR
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country.
Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.