Key Features
- MIDI Controller Generator from Pedal Input Jack
- Controller Number Selectable (CC)
- Can Be Used Standalone or In Loopback Configuration
- Can Be Used as Phantom Power for Kenton LD2 PRO
- 1/4'' Jack Lead for Pedal Loopback Included
Kenton LD3 PRO Programmable Pedal to MIDI Converter Overview
The Kenton LD3 PRO Programmable Pedal to MIDI Converter converts variable pedal information to MIDI. Conversion can be from the pedal (standalone mode), or used in-line between the pedal and a synth (loopback mode). The LD3 PRO can also be used to generate MIDI from an analogue controller pedal without needing to be connected to a synth. Additionally, the LD3 PRO can phantom power the Kenton LD2 MIDI volume level indicator, removing the need for power supplies and cables. The Kenton LD3 PRO is to be used in conjunction with the LD2 PRO, which can also display the value of non-MIDI expression pedals, and optionally generate MIDI out.
Product Ref: 95146
Full Description
View Full DescriptionLightweight, Robust Design
The Kenton LD3 PRO features a compact, lightweight design, making it ideal for the travelling engineer, producer, and performer. It can be easily fitted into a small bag and taken with you. The LD3 PRO takes up very little space, allowing it to be easily fitted anywhere you need it to be. The Kenton LD3 features a rugged metal construction, ensuring durability, and protection against accidental impact damage.
Features
- MIDI controller generator from pedal input jack
- Controller number selectable (CC)
- Polarity selectable (tip or ring variable)
- To be used in conjunction with: Kenton LD2 PRO
- Can be used standalone or in loopback configuration
- Can also generate switch information if required
- Soft thru on/off selectable (MIDI in echoed to MIDI out)
- Resend controller on prog change selectable
- Auto calibration facility
- 1 MIDI input, 2 MIDI outputs, 1 MIDI output for LD-2
- Phantom power for LD-2
- 1/4'' jack input for pedal (stereo jack)
- 1/4'' jack loopback to synth (if required)
- 1/4" to 1/4" stereo jack lead for pedal loopback supplied
- Rugged metal construction
Specifications
- Display: 3 x 7 segment display and 2 x 10 segment bargraph
- Dimensions: 183 x 110 x 40mm
- Weight: 0.4kg
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.
| Reviews of our service
View all