Lynx Hilo Reference A/D D/A Converter System

Full Description

True professionalism

Take total control. Featuring a responsive touchscreen and a very intuitive interface, the Hilo is one of the most powerful and user-friendly two-channel converters on the market. Route and mix signals using the in-depth but easy-to-use front panel controls. Select through a range of sample rate selection, clock source options, levels, metering and diagnostic features.

Hilo features incredibly low distortion and noise but still provides clear and defined audio signals. The digital or analog inputs can be routed to three separate outputs: Line output, Monitor output and Headphone output, each with their own dedicated DACs allowing each to offer a unique mix. There are separate volume controls for monitor and headphone outputs which are accessible via faders on the touchscreen or the responsive dial on the front of the unit.

All the tools you need

The consummate toolbox for your studio. Create up to 32 channel headphone mixes which are independent of the main outputs without losing any of the clarity you might get with dedicated headphone amps. Use the LSlot accessory to computer connectivity that adapts to your system. The Syncholock word clock is included and features in and out connections.

The Hilo has a lot of inputs and outputs - 12 inputs and 16 outputs, plus 32 channels possible via the LSlot port - allowing you to use Hilo no matter what the situation.

Designed to be simple, built to last

The Hilo is built to be simple. All of the ins and outs are featured on the back panel allowing for mounting onto a rack to be a permanent part of your studio. This is contrasted by the incredibly elegant front panel. The front features the excellent touch screen as well as a simple but responsive knob for tangible control over your settings.

Housed in a tough brushed metal body, no matter where you use the Lynx Hilo, you can be assured it can weather whatever.

Features

• Ultra-low noise and distortion specifications
• Flexible digital I/O section with choice of AES/EBU, SPDIF by coax or TOSLINK optical or ADAT formats
• 32 channel internal mixer in the updatable FPGA
• Open-ended software for future measurement, metering, diagnostic and personalization features

Specifications

• Line in L/R:
• THD+N: -114dB @1kHz, -1dBFS, 20kHz filter, +22dBu trim
• Dynamic range: 121dB, A-weighted, -60dBFS signal method
• Frequency response: ±0.01dB, 20–20kHz
• Crosstalk: -140dB maximum @ 1kHz, -1dBFS signal
• Full-scale trim settings: +0dBV, +2dBV, +4dBV, +6dBV, +18dBu, +20dBu, +22dBu, +24dBu
• Female XLR connectors
• Line out L/R:
• THD+N: -109dB @1kHz, -1dBFS, 20kHz filter, +22dBu trim
• Dynamic range: 121dB, A-weighted, -60dBFS signal method
• Frequency response: -135dB maximum @ 1kHz, -1dBFS signal
• Crosstalk: -135dB maximum @ 1kHz, -1dBFS signal
• Full-scale trim settings: +0dBV, +2dBV, +4dBV, +6dBV, +18dBu, +20dBu, +22dBu, +24dBu
• Male XLR connectors
• Monitor out L/R:
• THD+N: -107dB @1kHz, -1dBFS, 20kHz filter, volume at max
• Dynamic range: 121dB, A- weighted, -60dBFS signal method
• Frequency response: ±0.02dB, 20-20kHz
• Crosstalk: -135dB maximum @ 1kHz, -1dBFS signal
• Output level at max: +24dBu or +10dBu, jumper selectable
• 1/4" TRS connectors
• Headphone out:
• THD+N: -107dB @1kHz, -1dBFS, 20kHz filter, volume at max
• Dynamic range: 121dB, A-weighted, -60dBFS signal method
• Frequency response: ±0.02dB, 20-20kHz
• Crosstalk: -130dB maximum @ 1kHz, -1dBFS signal
• Output level at max: +19dBu
• 1/4” headphone jack
• AES/EBU: transformer-coupled on XLR connectors
• S/PDIF I/O coax: transformer-coupled on RCA jacks
• S/PDIF I/O optical: on optical connectors
• ADAT I/O: 8 channels at 48 kHz when selected on optical connectors
• Sample Rates: All standard rates up to 192 kHz using SynchcroLock sample clock generator
• Synchronization Sources
• Internal
• External word clock I/O: 75ohm TTL signal on BNC connectors AES/EBU or S/PDIF inputs
• Computer Connectivity:
• Windows 32-bit and 64-bit drivers provided by Lynx
• Macintosh OS X drivers provided by Apple
• LSlot™ Expansion Port: Supports Lynx LSlot expansion cards with up to 32 input and outputs simultaneously
• LCD Display: 480 x 272 LCD Touch Screen
• AC power: 110 to 230 VAC, 30 watts
• Battery power: 9-18 volts DC on 4-pin XLR
• Size: 8.50” wide x 3.25” tall x 10.00” deep (216mm x 83mm x 254mm)
• Shipping weight: 12 pounds (5.4kg)