MOTU 4Pre Hybrid Audio Interface

Full Description

The finest preamps

From drums to strings, and pianos to vocals. It's hard to make bad recordings when you've got MOTU preamps in your set-up. These studio-grade preamps guarantee crystal clear, transparent reproduction of virtually any instrument or voice. Their low-noise floor and extensive dynamic range makes every source sound wholly natural. So much so that upon later playback, you'll be forgiven for forgetting that you're not in the same room as the artist!

The world's greatest studio in your backpack

Thanks to the wide range of connectivity, the 4Pre can easily connect to any Mac or PC operating system for 96kHz recording possibilities. This lets you turn your computer into a fully-functioning recording studio wherever you desire! The combi-jack inputs enables you to record both microphone and line-level signals from synths and keyboards. Whilst the "Hi-Z" inputs are designed with the correct impedance to allow you to directly connect your guitar or bass without needing an amplifier or cabinet. Should you desire, this signal can be re-amped at a later date by utilising the on-board line outputs.

Optimised protection at all times

Just like every MOTU interface, the 4Pre comes complete with a durable, lightweight aluminum alloy chassis. This is perfect for enduring the vigors of live performance and continued use. Thanks to this premium exterior, your interface will look and sound as fresh as the day it left the factory!

Features

• Features two headphone output with independent volume controls
• Send signal directly to your speakers via the stereo main outs
• Combo-jack inputs allow you to connect microphone and line-level sources
• Create four separate mixes to suit the wants and needs of each performer
• Offers hybrid FireWire/USB 2.0 connectivity

Specifications

• Converters: 24-bit
• Sample Rates: 44.1, 48, 88.2, 96kHz
• Analog In:
  • 4 x XLR/TRS combo
  • 2 x 1/4" TRS (balanced/unbalanced)
  • 2 x 1/4" hi-Z guitar
• Analog Outputs:
  • 2 x 1/4" balanced TRS main out
  • 2 x 1/4" balanced TRS line out
  • 2 x 1/4" TRS headphone
• Digital Input: 1 x RCA coaxial S/PDIF
• Digital Output: 1 x RCA coaxial S/PDIF
• Computer I/O:
  • 1 x FireWire 400 (Type B)
  • 1 x USB 2.0
• Sync In/Out: S/PDIF
• SMPTE time code: (LTC)
• Headphone Output: 2 x 1/4" TRS phone with independent volume control
• Phantom Power: Individual +48V
• Front panel:
  • 2 x 10-segment ladder LEDs (main outs)
  • 4 x 5-segment LEDs (inputs)
  • 2 x signal present LEDs (S/PDIF I/O)
  • 2 x signal present LEDs (stereo line out)
  • 4 x LEDs (48V phantom power)
  • 4 x LEDs (-20 dB pad)
  • 5 x LEDs (main, line, S/PDIF, phone, trim)
  • 1 x LED (Vol/Pan)
• Power Requirements: 9-18V DC, 5W, or FireWire bus power
• Product Code: MOTU-4PRE