PreSonus HP60 6 Channel Headphone Amp

Full Description

Finishing touches

You can trim the volume of each headphone input either up, or down, by using the level control. This is great for applying general, broad-stroke, finishing touches to your headphone mixes. Take this manipulation further with the external stereo input that provides level control, as well as mono and mute buttons. At the touch of one button, the musicians will be able to isolate their vocal and instrument. This is great for allowing them to quickly check pitch and tuning.

Voice of reason

Thanks to the talkback function when you need to talk, everyone will listen. Simply plug your dynamic microphone into the back of the amplifier and you're good to go. If you wish to do this hands-free then no problem. You'll be free to use a foot pedal (not included) to determine when talk-back is on and off. For more complex set-ups you'll be able to connect two HP60s together to provide you with twelve inputs. You can even connect to a HP4 to create 10 unique headphone mixes.

Features

• Input/Output
  • 6 screaming-loud (150 mW/channel) headphone outputs (front panel)
  • 6 unbalanced stereo 1/4” line outputs (1 per channel); carries a copy of the channel mix
  • 6 unbalanced stereo 1/4” external analog line inputs (1 per channel) for “more me,” with trim controls
  • 4 balanced 1/4” analog line inputs (L/R Mix input pairs A and B)
  • 1 balanced XLR Talkback input for external dynamic microphone
  • 1 1/4” footswitch jack for hands-free Talkback operation
• Meters, controls, and features
  • 2 stereo input channels (A and B)
• Channel controls
  • External input level
  • Headphone level control for each headphone output
  • Mix A/B control (blends signals from input pairs A and B)
  • Mono switch for external input
  • Mute switch (mutes input pairs A and B)
• Master controls
  • Input A level
  • Input B level
  • Talk button (momentary switch)
  • Talkback-mic level
• Physical
  • 1U 19” rack-mountable, rugged steel chassis
  • Internal power supply with standard IEC connector

Specifications

• Inputs:
  • Inputs A and B Connector Type: (2 ea.) 1/4" TRS balanced
  • External Input Connector Type: 1/4" TRS stereo unbalanced
  • Input Impedance: 10 kohms
• Headphone Outputs:
  • Connector type: 1/4" TRS stereo unbalanced
  • Max Output Power: 150 mW/Ch.
  • Frequency Response: 20 Hz - 20 kHz, ±0.5 dB, 60ohm load
  • Headphone Impedance Working Range: 32ohm - 600ohm
• Power:
  • Internal supply: standard IEC connector 115 or 230 VAC
• Physical:
  • Dimensions: 1/3U rack-mount (with standard rack tray, not included)
    • Height: 1.75” (44.45 mm)
    • Depth: 5.5” (139.7 mm)
    • Width: 19” (482.6 mm)
  • Weight: 8.0 lbs. (3.63 kg)
• Product Code:
  • Product Code: HP60