Key Features
- Perfect for auditioning studio microphones
- Highly accurate reproduction with no colouration or artefacts
- Level match with individual trim controls
- Provides you with four XLR inputs and one XLR output
Radial Gold Digger 4-Channel Microphone Selector Overview
Make your life easier and streamline your workflow. The Radial Gold Digger Microphone Selector features four XLR microphone inputs and a single XLR output, allowing you to connect up to four microphones and route them to a single channel on a mixing console.
Product Ref: 118337
Full Description
View Full DescriptionShort and sweet
The big budgets that were synonymous with the "golden age" of recording no longer exist. As budgets and schedules get tighter, the days of experimenting with different microphone chains are long gone... or so it seems. Thanks to the Gold Digger, you'll be able to set up your choice of four condenser, ribbon, dynamic and tube microphones. The wide array of controls allow you to level-match to ensure your decision making is well informed and accurate. Radial have removed the "what ifs" from your mind. Feel confident and move forward knowing that thanks to this handy microphone selector, you've made the best choice possible!
Features
- Audition different microphones with the press of a button
- Four selectable inputs with trim controls
- Straight-wire distortion-free signal path
- Saves time and improves workflow in the studio
Specifications
- Audio Circuit Type: Passive with Active Relay Switching
- Input Connectors: 4 x XLR, Female
- Output Connectors: 1 x XLR, Male
- Controls:
- Indiviudal On/Off per Input
- Individual +48V per Input
- Variable Trim per Input
- Frequency Response: 10Hz - 100kHz
- Dynamic Range: >140dB
- Equivalent Input Noise: -115dBu
- Residual Noise: -140dB
- Maximum Input: +26dBu
- Maximum Output: +26dBu
- Total Harmonic Distortion: 0.0003 Percent
- Phase Deviation:
- Intermodulation Distortion: 0.001 Percent
- Input Impedance: 600 Ohms (Typical)
- Common Mode Rejection: -92dBu @ 55Hz
- Chassis: Powder-Coated 14 Gauge Steel
- Power Supply: +15V DC/400mA (Included)
- Dimensions: 121mm x 64mm x 147mm / 4.5'' x 2'' x 6'' (W x H x D)
- Weight: 1.3kg / 2.8lbs
- Product Code: R800-1440-00
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.
| Reviews of our service
View all