SubZero SZSM-4X Monitors and Passive Controller Pack

Full Description

Included in This Pack:

• SubZero SZSM-4X Studio Monitors
• SubZero MC-2 Passive Studio Monitor Controller
• XLR (F) - Jack Cable, 3m x2

SubZero SZSM-4X Studio Monitors

Balanced sound reproduction with a flat response

The SubZero SZ monitor series has been specifically designed to give accurate sound reproduction that is true to its source. With a wide frequency range of 50Hz to 20kHz, balanced tone and a high resolution flat response, the SZ series will not colour the sound. You'll be provided with a clear and accurate high end as well as a smooth, defined bottom end.

High quality speaker for reliable performance

You'll be provided with a hybrid set up of one active and one passive monitor. The SZSM-4X pair feature 4" drivers with a magnetically shielded mineral-filled polypropylene cone with a high temperature voice coil and a dampened rubber surround. This will provide you with an even, punchy low end, even at high volumes. Combined with the 3/4" magnetically shielded ferrofluid-cooled natural soft dome tweeter and the 2.7KHz crossover, these monitors will give clear and reliable sound, time after time.

Hard wearing versatile cabinet

The SubZero SZ monitor series are presented in high-density MDF enclosures that have been specially designed to reduce noise and resonance. Designed to work either horizontally or vertically, the SZ series has a specially designed bass port on the back, which reduces resonance, and allows the monitors to sound great in all monitoring situations.

SubZero SZ-MC2 Passive Studio Monitor Controller

The SubZero passive stereo controller will seamlessly fit into any studio setup. In a discreet and lightweight chassis you can have total control over your studio monitors, without the need for additional power supplies or interfaces. By simply plugging into the unit via TRS, XLR or stereo mini jack you can feed your audio through at a high quality 24 Bit resolution.

With XLR and stereo mini-jack outputs, the SubZero monitor controller works with both balanced and unbalanced connections making it universally compatible. The SubZero passive monitor controller features a large central knob so you can make precise adjustments to your sound output. The addition of mute and mono buttons also allows you to easily check for phase coherency and be in control of your sound.

Specifications

• Amplifier Class: Class D
• HF Driver: 0.75" Silk Dome Tweeter
• LF Driver: 4" Woofer
• SPL: 88dB +/- 3dB
• Crossover Point: 2.7KHz
• Input connectors: RCA (L + R), TRS Jacks (L + R)
• Frequency Response:85Hz-20kHz
• Indicator: LED
• Power Consumption: 60W
• DC Power Input: 18w 2.5A (positive polarity)
• Dimensions: 200 x 165 x 140mm
• Weight: 4kg

• Type: Passive Monitor Controller
• Channels: 1
• Inputs: 2
• Input Connectors: 1 x 3.5mm TRS, 2 x 1/4" TRS/XLR Combo
• Input Types: Balanced, Unbalanced
• Input Level (Max): 20dBu
• Input Impedance (Balanced): 10k Ohm
• Input Impedance (Unbalanced): 5K Ohm
• Outputs: 2
• Output Connections: 1 x 3.5mm TRS, 2 x XLR
• Output Types: Balanced, Unbalanced
• Output Level (Max): 20dBu
• Output Impedance: 100 Ohm
• Frequency Response: 10Hz - 40kHz
• THD: 0,002 , 0dBu input @ 1khz
• Attenuation (Max): -85dB (muted)
• Controls: Volume Knob, Mute Switch, Mono Switch
• Cabinet Material: Metal
• Cabinet Surface: Painted Metal
• Height: 50mm
• Width: 146mm
• Depth: 97mm
• Weight: 520g

The latest in music technology, for modern musicians and producers. SubZero combines innovation and quality, with the determination to help you get the sound you want. From studio and guitars, to powerful PA systems and home audio setups - SubZero is all about cutting-edge audio.