Key Features
- Adjustable tone thanks to four-band EQ
- Booming, aggressive tone lowing from two 10" speakers
- Use as a floor monitor or in an upright position thanks to an angled cabinet design
- Dial it up to the max with bi-band limiter
DISC Markbass CMD 102P IV Bass Combo Amp Overview
The Markbass CMD 102P IV Bass Combo Amp is a powerful yet lightweight combo, that still holds an incredibly warm natural tone. A new bi-band limiter responds faster and more dynamically to your playing, allowing you to add nuances to your booming bass. An updated four-band EQ offers effective controls to easily personalise your sound, either boosting or cutting up to 16dB for all four bands.
Volume isn’t an issue with this combo. A line out level control knob offers precise control of the level sent out to the mixer, a pre/post EQ switch means you can route your XLR output before or after the EQ as required. The handy little mute switch is positioned on the front of the amp, so you can quickly cut the sound for those moments when you need to hear anything other than this fantastic bass tone. Packing an earth shattering 500W rms at four ohms or 300W rms at eight, the Markbass CMD 102P IV Bass Combo Amp sounds huge.
Product Ref: 187145
Full Description
View Full DescriptionUnlimited tone
Blow the room away. With 500W of power at 4 ohms and 300W at 8, this amp will blast your basslines out at incredible force, offering more volume than you would ever need. What makes it even better is this earthquake of sound doesn’t come at the detriment of the amp’s tone. The CMD 102P IV still holds its iconic natural warmth and provides multiple ways to refine every little detail.
A four band EQ is a perfect place to start, giving you plenty of room to adjust with the ability to either increase or decrease each band up to 16dB, making the amp easily customisable to suit any genre. For quicker access to the EQ, Markbass have included a three-way switch, letting you quickly change between a super-balanced flat tone, a scooped pre-set that boosts highs and lows while dropping the mids, or finally a footswitch option to control the mute and scooped EQ simultaneously.
No connectivity difficulty
Optimised so you can efficiently connect your devices, the CMD 102P IV offers up a wide selection of connectivity options. As you would expect, a standard unbalanced 1/4 “ jack input is featured on the front, alongside a footswitch input. A tuner out connection also allows you to add a tuner into your setup, to ensure total tonal accuracy during every moment of the performance. A balanced XLR line out allows the amp to be directly connected to a DI, therefore making it easier to set up at gigs or for recording. These incredibly loud 10” speakers can also be perfectly partnered with an extension cabinet to reach deafening amplitudes. It’s safe to say these features make this bass amp extremely user friendly.
Monitor design
Designed for bassists who crave premium quality sound whilst performing, the Markbass 102p IV can be utilised for personal monitoring. The angled position directs the sound directly to you as the performer, letting the sound pierce through any audio fog so you can hear yourself clearly on stage. As this combo amp can adapt effectively to multiple practical situations, the versatility it provides is unrivalled, making it a fantastic companion for any musician.
Specifications
- Input Impedance: 1 Mohm, Max. Voltage: 9 Vpp
- Return Impedance: 22 Kohm, Max. Voltage: 10 Vpp
- Gain: –46 Db To +23 Db Range
- Line Out Level Control: On Front Panel
- Pre/Post Eq (For Line Out) Switch: On Rear Panel
- Ground Lift Switch: On Rear Panel
- Volume Controls: Mute Switch, Master Volume
- Low: Centre Frequency 68 Hz; Level: ±16 Db
- Mid Low: Centre Frequency 360 Hz; Level: ±16 Db
- Mid High: Centre Frequency 800 Hz; Level: ±16 Db
- High: Centre Frequency 10 Khz; Level: ±16 Db
- Old School: Max Cut Range: 250 Hz – 20 Khz
- 3 Way Switch: Flat/Scooped-Mid/Fsw
- Send Effects: Unbalanced, Max. Voltage 20 Vpp
- Tuner Out: Unbalanced, Max. Voltage 2 Vpp
- Line Out: Balanced XLR, Max. Voltage 20 Vpp
- Speaker Out: Speakon/1/4” Combo, 1/4”*
- Limiter: Bi-Band Limiter
- Footswitch (Optional): Flat/Scooped-Mid
- Output Power: 500w Rms @ 4 Ohm, 300w Rms @ 8 Ohm
- Power Requirement: 100v; 120v; 230v; 240v 50/60hz (Voltage Is Factory Preset According To Region Of Sale)
Speaker
- Speaker: 2 x 10"
- Tweeter: Piezo
- Bass port: front
- Impedance: 8 ohms
- Speaker power handing: 400W RMS (AES Standard)
- Frequency response: 45 Hz to 18 kHz
- Crossover frequency: 3.5 kHz
- Sensitivity: 100 dB SPL
- Weight: 40.79 / 18.5 Kg
- Width: 23.03in. / 58.5 cm
- Height: 18.5 in. / 47 cm
- Depth: 18.7 in. / 47.5 cm
| Reviews of our service
View all
