Electro Harmonix Canyon Delay & Looper - Secondhand

Full Description

Defined delays

Don't delay. There are lots to get through. With 10 different delay types at your fingertips, you'll have access to a goldmine of different voicings which will transform your tone into a wall of shimmering sound. You could, for example, choose Echo; a simple digital delay which repeats each note in the same manner, slowly decreasing in volume. Or choose something slightly more special, like the Shimmer delay, which generates a wave of repeated, octave-shifted notes for a rich, dense tone. And there's many more, each offering their own unique qualities.

You can control each delay type using the Delay and Feedback controls, which affect the delay time and number of repeats respectively. You'll be able to get everything just right. And each of these knobs has a secondary function, which has a different effect depending on the delay type you're using. This gives you unparalleled control over this pedal, and lets you get each effect the exact way you desire.

Loop it

Support yourself. As if delay weren't enough, you can also create your own backing loops with this nifty machine. By selecting loop mode and pressing the footswitch, you can record any riff or chord progression and then jam over it. If you make a mistake, there's a handy undo/redo function, so you can rectify it instantly. And each loop will be stored in the pedal's internal memory until erased. You'll never stop being inspired.

Features

• Offers up to 62 seconds of loop length
• Range of delay effects ranging between 5ms to 3 seconds of delay time
• Internal & external tap tempo capabilities with tap divide
• Internal trails switch sets pedal to produce repeats or stop immediately when set to bypass
• Hidden parameters for further tone shaping
• Rugged housing protects electronics

Specifications

• Modes:
  • Echo Digital Delay
  • Modulation
  • Multi-Tap
  • Reverse
  • Deluxe Memory Man
  • Tape
  • Reverb Plus Delay
  • Octave
  • Shimmer
  • Sample & Hold
  • Looper
• Controls:
  • FX Level
  • Delay
  • Mode Selector
  • Feedback
  • Tap/Divide Switch
  • Tails Switch (Internal)
• Delay range: 5ms – 3 Sec.
• Loop Length: 62 Seconds
• Input: 1 x Instrument Jack, 1 x Tap Tempo
• Output: 1 x 1/4” Jack
• Power: 9V DC/9V Battery
• Width: 4” (102mm)
• Depth: 4.75” (121mm)
• Height: 2.25” (89mm)
• Includes: EHX 9.6DC-200 PSU