Key Features
- Dirty, thick crunch to enhance your bass tone
- Choose between silicon and LED clipping diodes
- Separate Dry and Wet level controls
- Robust protection from MXR's famed metal enclosure
MXR Bass Distortion Pedal Overview
The MXR Bass Distortion Pedal provides big gnarly tones with all the low end you could ever desire. Selectable clipping type gives you full sonic control over how your signal breaks up, complemented by having separate wet/dry controls to dial in your perfect tone. The Tone control only affects the distortion signal and is a simple high-pass filter for dialling back the treble response.
Product Ref: 55301
Full Description
View Full DescriptionFerocious low end
Back in the day, if you wanted to use a distortion pedal and keep your low end intact, you had to split your clean and dirty signals between two amps. With the MXR Bass Distortion, there's no such need-this pedal puts control over the clean/dirty mix right at your feet with separate Dry and Wet level controls. The Tone control, which only affects the distortion signal, is a simple high cut filter for dialing back the top end, and the Distortion control sets the distortion signal's intensity. Use the two to find-tune your distorted tone.
Finally, the MXR Bass Distortion's raunchy sound comes in two flavors, selectable via the LED/SIL switch. The default SIL setting uses silicon clipping diodes for an aggressive, biting sound and a bit of compression, while the LED setting uses LED diodes for a more wide open sound and a nice gain bump. Flick between the two to suit any application. Two quality distortions in a single stompbox.
Specifications
- Input Impedance: 1 MΩ
- Output Impedance: 315Ω @ 1kHz
- Signal to Noise: 90 dB
- Distortion Gain: +40 dBV
- Dry Max Gain: +16 dBV
- Bypass: True Hardwire
- Current Draw: 11 mA
- Power Supply: ECB003 or standard 9 volt battery
| Reviews of our service
View all
