Trustscore 4.7

Trace Elliot ELF Bass Head

View PDF
This product is currently not available for purchase

Key Features

  • Extremely Portable Amp Head, Can Fit Into Your Back Pocket
  • Ultra-High Preamp Input Impedance
  • 3-Band Equalizer Emulates Classic Trace Elliot EQ Filters
  • Gain, Bass, Mid & Treble Controls, to Shape Your Tone
  • Plug in Your Headphones To Practice Without Disturbing Others

Trace Elliot ELF Bass Head Overview

The Trace Elliot ELF Bass Head is the ideal solution for any player who needs a portable amp head but doesn't want to lose performance quality. It features ultra-high input impedance for maximum sensitivity with passive pickups. You can practise without disturbing others when you connect your headphones to the 1/4'' headphone output. The 3-band equalizer emulates the response of Trace Elliot's classic multi-band EQ filters. You can fully shape your tone by using the gain, bass, mid and treble controls. The Trace Elliot ELF Bass Head features a post EQ balanced XLR DI output with ground lift to send a classic Trace Elliot tone to a recording device or mixing console.

Product Ref: 112528

Full Description

View Full Description

Features

  • Wide range input gain control with signal level indicator
  • 3-band rotary equalizer that emulates the response of classic Trace Elliot multi-band graphic EQ filters
  • Ultra-high preamp input impedance (more than 10meg ohms) for maximum sensitivity when using passive pickups
  • Post EQ balanced XLR DI output with ground lift for sending classic Trace Elliot tone to a mixing console or recording device
  • 1/4’’ (6.35mm) headphone output for quiet practice
  • Carry bag included

Specifications

General

  • Controls: Gain, Bass, Mid, Treble, Volume, Ground-Lift Switch
  • Inputs: 1/4'’ Instrument
  • Outputs: 1/4'’ Headphones, 1/4'’ Speaker, XLR D.I.
  • Mains Voltage: 230 vac - 50/60Hz - T1.6AL/250V
  • Power Consumption:
    • Typical: 30W
    • Maximum: 240W

Power Amp

  • Power: 200W, 130W
  • Noise: -62.5 dBu
  • Impedance: 4 Ohms @ 200W, 8 Ohms @ 130W
  • Protection: Clip Limiting, Thermal, Over-Current/Short-Circuit, DC Output

Preamp

  • Nominal Input Sensitivity: All Controls @12:00 = -6.44dBu (369mV)
  • Input Impedance: More Than 10 MOhm
  • EQ: 3-Band Rotary Type w/Proprietary TE Filters
    • Low Centre: 80 Hz
    • Mid Centre: 400 Hz
    • High Centre: 4.2 KHz
  • DI XLR Balanced Output: PIN 1 = GND, PIN 2 = Sig+, PIN 3 = Sig-
    • Output Impedance: 1 KOhm
    • Noise Floor: -104.3dBu
    • Noise Floor w/Sig (Nom.): -88dBu

Dimensions

  • Width: 6.75'' (171 mm)
  • Depth: 4.10'' (104 mm)
  • Height: 1.35'' (34 mm)
  • Weight: 0.73kg (1.60 lbs)

| Reviews of our service

Showing our latest reviews
View all
×
Oops! There was an error retrieving our TrustPilot reviews. Please, try again later.